Building hybridized 28-baseline pupil-remapping photonic interferometers for future high resolution imaging
arXiv:2105.01381 · doi:10.1364/AO.422729
Abstract
One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming ELT generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a novel hybridized photonic interferometer, with 8 simultaneous inputs, forming 28 baselines, the largest amount to-date. Utilizing different photonic fabrication technologies, we combine a 3D pupil remapper with a planar 8-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to over phase piston error, relating to a detection contrast of on an Adaptive-Optics corrected 8-m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs.
arXiv comment10 pages, 10 figures, 1 table, submitted to Astrophotonics Special Issue in Applied Optics
References in corpus (22)
- Images of a fourth planet orbiting HR 8799
- First Light for GRAVITY: Phase Referencing Optical Interferometry for the Very Large Telescope Interferometer
- PIONIER: a 4-telescope visitor instrument at VLTI
- The Palomar Testbed Interferometer
- Hints for a Turnover at the Snow Line in the Giant Planet Occurrence Rate
- Phase-Induced Amplitude Apodization of Telescope Pupils for Extrasolar Terrestrial Planet Imaging
- Low bend loss waveguides enable compact, efficient 3D photonic chips
- An integrated optics beam combiner for the second generation VLTI instruments
- Arrayed Waveguide Grating Spectrometers for Astronomical Applications: New Results
- Characterization and on-sky demonstration of an integrated photonic spectrograph for astronomy
- Sparse aperture masking at the VLT I. Faint companion detection limits for the two debris disk stars HD 92945 and HD 141569
- First on-sky demonstration of an integrated-photonic nulling-interferometer: The GLINT instrument
- Starlight Demonstration of the Dragonfly Instrument: an Integrated Photonic Pupil Remapping Interferometer for High Contrast Imaging
- First starlight spectrum captured using an integrated photonic micro-spectrograph
- FIRST, a fibered aperture masking instrument. I. First on-sky test results
- Demonstration of an efficient, photonic-based astronomical spectrograph on an 8-m telescope
- Formation and evolution of planetary systems: the impact of high angular resolution optical techniques
- High-performance 3D waveguide architecture for astronomical pupil-remapping interferometry
- Characterization of integrated optics components for the second generation of VLTI instruments
- Design of Optically Path Length Matched, Three-Dimensional Photonic Circuits Comprising Uniquely Routed Waveguides
- Comparison of Fourier and model-based estimators in single mode multiaxial interferometry
- The unlikely rise of masking interferometry: leading the way with 19th century technology
Cited by in corpus (4)
- Asgard/NOTT: L-band nulling interferometry at the VLTI I. Simulating the expected high-contrast performance
- Six-telescope integrated optics beam combiner fabricated using ultrafast laser inscription for J- and H-band astronomy
- Astrophotonics -- current capabilities and the road ahead
- Astrophotonic Technologies