Tunable dual-comb spectrometer for mid-infrared trace gas analysis from 3 to 4.7 μm
arXiv:2104.11027 · doi:10.1364/OE.428709
Abstract
Dual-frequency comb spectroscopy has emerged as a disruptive technique for measuring wide-spanning spectra with high resolution, yielding a particularly powerful technique for sensitive multi-component gas analysis. We present a spectrometer system based on dual electro-optical combs with subsequent conversion to the mid-infrared via tunable difference frequency generation, operating in the range from 3 to 4.7 m. The simultaneously recorded bandwidth is up to 454(1) GHz and a signal-to-noise ratio of 7.3(2) x 10 Hz can be reached. The conversion preserves the coherence of the dual-comb within 3 s measurement time. Concentration measurements of 5 ppm methane at 3.3 m, 100 ppm nitrous oxide at 3.9 m and a mixture of 15 ppm carbon monoxide and 5 % carbon dioxide at 4.5 m are presented with a relative precision of 1.4 % in average after 2 s measurement time. The noise-equivalent absorbance is determined to be less than 4.6(2) x 10 Hz.
arXiv comment12 pages, 6 figures
References in corpus (13)
- Frequency comb spectroscopy
- Coherent Raman spectro-imaging with laser frequency combs
- Adaptive real-time dual-comb spectroscopy
- Frequency-agile dual-comb spectroscopy
- High Coherence Mid-Infrared Dual Comb Spectroscopy Spanning 2.6 to 5.2 microns
- Coherent Dual Comb Spectroscopy at High Signal to Noise
- Mid-infrared dual-comb spectroscopy with electro-optic modulators
- Coherent cavity-enhanced dual-comb spectroscopy
- High-resolution and gapless dual comb spectroscopy with current-tuned quantum cascade lasers
- Time-resolved mid-infrared dual-comb spectroscopy
- Dual-comb interferometry via repetition-rate switching of a single frequency comb
- Mid-infrared frequency combs at 10 GHz
- Two-octave-wide (3-12 μm) mid-infrared frequency comb produced as an optical subharmonic in a nondispersive cavity