The Integration and Testing Program for the Simons Observatory Large Aperture Telescope Optics Tubes

Abstract

The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). The 6~m Large Aperture Telescope (LAT), which will target the smaller angular scales of the CMB, utilizes a cryogenic receiver (LATR) designed to house up to 13 individual optics tubes. Each optics tube is comprised of three silicon lenses, IR blocking filters, and three dual-polarization, dichroic TES detector wafers. The scientific objectives of the SO project require these optics tubes to achieve high-throughput optical performance while maintaining exquisite control of systematic effects. We describe the integration and testing program for the SO LATR optics tubes that will verify the design and assembly of the optics tubes before they are shipped to the SO site and installed in the LATR cryostat. The program includes a quick turn-around test cryostat that is used to cool single optics tubes and validate the cryogenic performance and detector readout assembly. We discuss the optical design specifications the optics tubes must meet to be deployed on sky and the suite of optical test equipment that is prepared to measure these requirements.

References in corpus (10)

• The Simons Observatory: Science goals and forecasts
• The Primordial Inflation Explorer (PIXIE): A Nulling Polarimeter for Cosmic Microwave Background Observations
• CMB-S4 Science Book, First Edition
• The Atacama Cosmology Telescope: Two-Season ACTPol Spectra and Parameters
• A 2500 square-degree CMB lensing map from combined South Pole Telescope and Planck data
• A measurement of the CMB E-mode angular power spectrum at subdegree scales from 670 square degrees of POLARBEAR data
• The Simons Observatory: Modeling Optical Systematics in the Large Aperture Telescope
• Simons Observatory Microwave SQUID Multiplexing Readout -- Cryogenic RF Amplifier and Coaxial Chain Design
• The Effects of Bandpass Variations on Foreground Removal Forecasts for Future CMB Experiments
• Assembly development for the Simons Observatory focal plane readout module

Cited by in corpus (3)

• The Simons Observatory Large Aperture Telescope Receiver
• The Simons Observatory: Characterizing the Large Aperture Telescope Receiver with Radio Holography
• The Simons Observatory: Design, Optimization, and Performance of Low Frequency Detectors