Bulk acoustofluidic devices driven by thin-film transducers and whole-system resonance modes
arXiv:2102.01039 · doi:10.1121/10.0005624
Abstract
In acoustofluidics, acoustic resonance modes for fluid and microparticle handling are traditionally excited by bulk piezoelectric transducers. In this work, we demonstrate by numerical simulation in three dimensions (3D) that integrated piezoelectric thin-film transducers constituting less than 0.1% of the device work equally well. The simulations are done using a well-tested and experimentally validated numerical model. Our proof-of-concept example is a water-filled straight channel embedded in a mm-sized glass chip with a 1-um thick thin-film transducer made of (Al,Sc)N. We compute the acoustic energy, streaming, and radiation force, and show that it is comparable to that of a conventional silicon-glass device actuated by a bulk PZT transducer. The ability of the thin-film transducer to create the desired acoustofluidic effects in bulk acoustofluidic devices rely on three physical aspects: The in-plane-expansion of the thin-film transducer under the orthogonal applied electric field, the acoustic whole-system resonance of the device, and the high Q-factor of the elastic solid constituting the bulk part of the device. Consequently, the thin-film device is surprisingly insensitive to the Q-factor and resonance properties of the thin-film transducer.
arXiv comment12 pages, 8 pdf figures, compiles using JASAnew.cls
References in corpus (9)
- On the forces acting on a small particle in an acoustical field in a viscous fluid
- Observation of a single-beam gradient force acoustical trap for elastic particles: acoustical tweezers
- Ultrasound-induced acoustophoretic motion of microparticles in three dimensions
- A numerical study of thermoviscous effects in ultrasound-induced acoustic streaming in microchannels
- Theory of pressure acoustics with boundary layers and streaming in curved elastic cavities
- Three-dimensional numerical modeling of surface acoustic wave devices: Acoustophoresis of micro- and nanoparticles including streaming
- Whole-system ultrasound resonances as the basis for acoustophoresis in all-polymer microfluidic devices
- Numerical study of the coupling layer between transducer and chip in acoustofluidic devices
- Fabrication, characterization, and simulation of glass devices with AlN-thin-film-transducers for excitation of ultrasound resonances