Three-dimensional numerical modeling of surface acoustic wave devices: Acoustophoresis of micro- and nanoparticles including streaming

Abstract

Surface acoustic wave (SAW) devices form an important class of acoustofluidic devices, in which the acoustic waves are generated and propagate along the surface of a piezoelectric substrate. Despite their wide-spread use, only a few fully three-dimensional (3D) numerical simulations have been presented in the literature. In this paper, we present a 3D numerical simulation taking into account the electromechanical fields of the piezoelectric SAW device, the acoustic displacement field in the attached elastic material, in which the liquid-filled microchannel is embedded, the acoustic fields inside the microchannel, as well as the resulting acoustic radiation force and streaming-induced drag force acting on micro- and nanoparticles suspended in the microchannel. A specific device design is presented, for which the numerical predictions of the acoustic resonances and the acoustophoretic repsonse of suspended microparticles in 3D are successfully compared with experimental observations. The simulation provides a physical explanation of the the observed qualitative difference between devices with an acoustically soft and hard lid in terms of traveling and standing waves, respectively. The simulations also correctly predict the existence and position of the observed in-plane streaming flow rolls. The presented simulation model may be useful in the development of SAW devices optimized for various acoustofluidic tasks.

arXiv comment16 pages, 8 pdf figures, RevTex

References in corpus (10)

• On the forces acting on a small particle in an acoustical field in a viscous fluid
• Forces acting on a small particle in an acoustical field in a thermoviscous fluid
• A numerical study of thermoviscous effects in ultrasound-induced acoustic streaming in microchannels
• Fast acoustic tweezers for the two-dimensional manipulation of individual particles in microfluidic channels
• Theory of pressure acoustics with boundary layers and streaming in curved elastic cavities
• Synthesis of anisotropic swirling surface acoustic waves by inverse filter, towards integrated generators of acoustical vortices
• A theoretical study of time-dependent, ultrasound-induced acoustic streaming in microchannels
• Three-Dimensional Numerical Modeling of Acoustic Trapping in Glass Capillaries
• Modeling of microdevices for SAW-based acoustophoresis --- a study of boundary conditions
• Performance study of acoustophoretic microfluidic silicon-glass devices by characterization of material- and geometry-dependent frequency spectra

Cited by in corpus (7)

• Unveiling of the mechanisms of acoustic streaming induced by sharp edges
• Theory of pressure acoustics with thermoviscous boundary layers and streaming in elastic cavities
• Acoustophoresis in polymer-based microfluidic devices: modeling and experimental validation
• Bulk acoustofluidic devices driven by thin-film transducers and whole-system resonance modes
• Fabrication, characterization, and simulation of glass devices with AlN-thin-film-transducers for excitation of ultrasound resonances
• Acoustothermal Effect: Mechanism and Quantification of the Heat Source
• Acoustic streaming generated by sharp edges: the coupled influences of liquid viscosity and acoustic frequency