Microresonator devices lithographically introduced at the optical fiber surface

Abstract

We present a simple lithographic method for fabrication of microresonator devices at the optical fiber surface. First, we undress the predetermined surface areas of a fiber segment from the polymer coating with a focused CO2 laser beam. Next, using the remaining coating as a mask, we etch the fiber in a hydrofluoric acid solution. Finally, we completely undress the fiber segment from coating to create a chain of silica bottle microresonators with nanoscale radius variation (SNAP microresonators). We demonstrate the developed method by fabrication of a chain of five 1 mm long and 30 nm high microresonators at the surface of a 125 micron diameter optical fiber and a single 0.5 mm long and 291 nm high microresonator at the surface of a 38 micron diameter fiber. As another application, we fabricate a rectangular 5 mm long SNAP microresonator at the surface of a 38 micron diameter fiber and investigate its performance as a miniature delay line. The propagation of a 100 ps pulse with 1 ns delay, 0.035c velocity, and negligible dispersion is demonstrated. In contrast to the previously developed approaches in SNAP technology, the developed method allows the introduction of much larger fiber radius variation ranging from nanoscale to microscale.

arXiv comment5 pages, 4 figures

References in corpus (11)

• Cavity Optomechanics
• Nonlinear and Quantum Optics with Whispering Gallery Resonators
• Delay of light in an optical bottle resonator with nanoscale radius variation: dispersionless, broadband, and low-loss
• Optical bottle microresonators
• Bottle microresonator broadband and low repetition rate frequency comb generator
• Permanent matching of coupled optical bottle resonators with better than 0.16 GHz precision
• Fabrication of surface nanoscale axial photonics (SNAP) structures with a femtosecond laser
• Rectangular SNAP microresonator fabricated with a femtosecond laser
• Discovery of Parabolic Microresonators Produced via Fiber Tapering
• In situ observation of slow and tunnelling light at the cutoff wavelength of an optical fiber
• Transient reconfigurable subangstrom-precise photonic circuits at the optical fiber surface