Quantum non-demolition dispersive readout of a superconducting artificial atom using large photon numbers

Abstract

Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally observed to also increase these transition rates. Here we present a fluxonium artificial atom in which we measure an overall flat dependence of the transition rates between its first two states as a function of $\bar{n}$, up to $\bar{n}\approx 200$. Despite the fact that we observe the expected decrease of the dispersive shift with increasing readout power, the signal-to-noise ratio continuously improves with increasing $\bar{n}$. Even without the use of a parametric amplifier, at $\bar{n}=74$, we measure fidelities of 99% and 93% for feedback-assisted ground and excited state preparation, respectively.

arXiv commenttypos corrected, added figure at p.10 (section IV of the Supplemental Material), added references

References in corpus (46)

• Circuit Quantum Electrodynamics: Coherent Coupling of a Single Photon to a Cooper Pair Box
• Cavity quantum electrodynamics for superconducting electrical circuits: an architecture for quantum computation
• Coherent control of macroscopic quantum states in a single-Cooper-pair box
• Introduction to Quantum Noise, Measurement and Amplification
• Coupling Superconducting Qubits via a Cavity Bus
• Resolving photon number states in a superconducting circuit
• Fluxonium: single Cooper pair circuit free of charge offsets
• Coherent quantum state storage and transfer between two phase qubits via a resonant cavity
• Superconducting qubit-oscillator circuit beyond the ultrastrong-coupling regime
• Amplification and squeezing of quantum noise with a tunable Josephson metamaterial
• Phase preserving amplification near the quantum limit with a Josephson Ring Modulator
• Observing single quantum trajectories of a superconducting qubit
• Observation of quantum jumps in a superconducting artificial atom
• Realizing Rapid, High-Fidelity, Single-Shot Dispersive Readout of Superconducting Qubits
• To catch and reverse a quantum jump mid-flight
• Dispersive regime of circuit QED: photon-dependent qubit dephasing and relaxation rates
• Quantum back-action of variable-strength measurement
• High-Fidelity Readout in Circuit Quantum Electrodynamics Using the Jaynes-Cummings Nonlinearity
• Measuring and Suppressing Quantum State Leakage in a Superconducting Qubit
• Quantum non-demolition measurement of a superconducting two-level system
• Implementation of low-loss superinductances for quantum circuits
• Granular aluminum: A superconducting material for high impedance quantum circuits
• Implementing optimal control pulse shaping for improved single-qubit gates
• Measurement-induced state transitions in a superconducting qubit: Beyond the rotating wave approximation
• Quasiparticle dynamics in granular aluminum close to the superconductor to insulator transition
• Heralded state preparation in a superconducting qubit
• Circuit Quantum Electrodynamics of Granular Aluminum Resonators
• Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations
• Controlling the dynamic range of a Josephson parametric amplifier
• Gated conditional displacement readout of superconducting qubits
• Universal fast flux control of a coherent, low-frequency qubit
• Quantum Superinductor with Tunable Non-Linearity
• Demonstration of a Tuneable Coupler for Superconducting Qubits Using Coherent, Time Domain, Two-Qubit Operations
• Persistent control of a superconducting qubit by stroboscopic measurement feedback
• Measurement-induced qubit state mixing in circuit QED from up-converted dephasing noise
• Ultrastrong coupling in two-resonator circuit QED
• Non-linear dispersive regime of cavity QED: The dressed dephasing model
• Fast high fidelity quantum non-demolition qubit readout via a non-perturbative cross-Kerr coupling
• Quantization of inductively-shunted superconducting circuits
• Lifetime renormalization of driven weakly anharmonic superconducting qubits: II. The readout problem
• Non-degenerate parametric amplifiers based on dispersion engineered Josephson junction arrays
• Continuous quantum nondemolition measurement of the transverse component of a qubit
• Lifetime renormalization of weakly anharmonic superconducting qubits: I. Role of number non-conserving terms
• Simultaneous monitoring of fluxonium qubits in a waveguide
• State preparation of a fluxonium qubit with feedback from a custom FPGA-based platform
• Minimizing the discrimination time for quantum states of an artificial atom

Cited by in corpus (30)

• Fluxonium: an alternative qubit platform for high-fidelity operations
• The QICK (Quantum Instrumentation Control Kit): Readout and control for qubits and detectors
• Scalable High-Performance Fluxonium Quantum Processor
• Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier
• Observation of Josephson Harmonics in Tunnel Junctions
• Measurement-Induced Transmon Ionization
• Gralmonium: Granular Aluminum Nano-Junction Fluxonium Qubit
• Two-level system hyperpolarization using a quantum Szilard engine
• Photon-noise-tolerant dispersive readout of a superconducting qubit using a nonlinear Purcell filter
• Fast high-fidelity gates for galvanically-coupled fluxonium qubits using strong flux modulation
• A superconducting qubit with noise-insensitive plasmon levels and decay-protected fluxon states
• High coherence fluxonium manufactured with a wafer-scale uniformity process
• Measurement-induced state transitions in dispersive qubit readout schemes
• Hardware implementation of quantum stabilizers in superconducting circuits
• An rf-SQUID-based traveling-wave parametric amplifier with -84 dBm input saturation power across more than one octave bandwidth
• A Multi-Qubit Quantum Gate Using the Zeno Effect
• Minimizing the discrimination time for quantum states of an artificial atom
• Microwave-activated gates between a fluxonium and a transmon qubit
• Dephasing in Fluxonium Qubits from Coherent Quantum Phase Slips
• Impact of Josephson junction array modes on fluxonium readout
• Flux-pulse-assisted Readout of a Fluxonium Qubit
• Transmon-qubit readout using in-situ bifurcation amplification in the mesoscopic regime
• Practical Trainable Temporal Postprocessor for Multistate Quantum Measurement
• Pure kinetic inductance coupling for cQED with flux qubits
• Radiofrequency cascade readout of coupled spin qubits
• In-situ tunable interaction with an invertible sign between a fluxonium and a post cavity
• Effects of the measurement power on states discrimination and dynamics in a circuit-QED experiment
• Non-demolition fluorescence readout and high-fidelity unconditional reset of a fluxonium qubit via dissipation engineering
• Simultaneous sweet-spot locking of gradiometric fluxonium qubits
• Model Order Reduction for Open Quantum Systems Based on Measurement-adapted Time-coarse Graining