Aerial Intelligent Reflecting Surface: Joint Placement and Passive Beamforming Design with 3D Beam Flattening
arXiv:2007.13295
Abstract
This paper proposes a new three-dimensional (3D) wireless passive relaying system enabled by aerial IRS (AIRS). Compared to the conventional terrestrial IRS, AIRS enjoys more deployment flexibility as well as wider-range signal reflection, thanks to its high altitude and thus more likelihood of establishing line-of-sight (LoS) links with ground source/destination nodes. Specifically, we aim to maximize the worst-case signal-to-noise ratio (SNR) over all locations in a target area by jointly optimizing the transmit beamforming for the source node and the placement as well as 3D passive beamforming for the AIRS. The formulated problem is non-convex and thus difficult to solve. To gain useful insights, we first consider the special case of maximizing the SNR at a given target location, for which the optimal solution is obtained in closed-form. The result shows that the optimal horizontal AIRS placement only depends on the ratio between the source-destination distance and the AIRS altitude. Then for the general case of AIRS-enabled area coverage, we propose an efficient solution by decoupling the AIRS passive beamforming design to maximize the worst-case array gain, from its placement optimization by balancing the resulting angular span and the cascaded channel path loss. Our proposed solution is based on a novel 3D beam broadening and flattening technique, where the passive array of the AIRS is divided into sub-arrays of appropriate size, and their phase shifts are designed to form a flattened beam pattern with adjustable beamwidth catering to the size of the coverage area. Both the uniform linear array (ULA)-based and uniform planar array (UPA)-based AIRSs are considered in our design, which enable two-dimensional (2D) and 3D passive beamforming, respectively. Numerical results show that the proposed designs achieve significant performance gains over the benchmark schemes.
arXiv comment16 pages
References in corpus (10)
- Spatially Sparse Precoding in Millimeter Wave MIMO Systems
- Wireless Communications with Reconfigurable Intelligent Surface: Path Loss Modeling and Experimental Measurement
- Millimeter Wave Beamforming for Wireless Backhaul and Access in Small Cell Networks
- Channel Estimation for RIS-Empowered Multi-User MISO Wireless Communications
- A Framework of Robust Transmission Design for IRS-aided MISO Communications with Imperfect Cascaded Channels
- Secure Wireless Communication via Intelligent Reflecting Surface
- On Low-Resolution ADCs in Practical 5G Millimeter-Wave Massive MIMO Systems
- Intelligent Reflecting Surface Aided Wireless Communications: A Tutorial
- Reconfigurable Intelligent Surfaces and Metamaterials: The Potential of Wave Propagation Control for 6G Wireless Communications
- User Cooperation for IRS-aided Secure SWIPT MIMO Systems
Cited by in corpus (3)
- Reconfigurable Intelligent Surfaces in Challenging Environments: Underwater, Underground, Industrial and Disaster
- UAV-Assisted and Intelligent Reflecting Surfaces-Supported Terahertz Communications
- A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence