Minor Actinides Transmutation in Candidate Accident Tolerant Fuel-Claddings U3Si2-FeCrAl and U3Si2-SiC
arXiv:1809.01597 · doi:10.1016/j.anucene.2018.12.003
Abstract
An advanced transmutation method is suggested that the long-lived Minor Actinides (MAs) in the spent fuel can be efficiently transmuted in the candidate Accident Tolerant Fuel (ATF). The transmutation of MAs is investigated through the Monte Carlo simulations in two potential fuel-claddings of ATF, U3Si2-FeCrAl and U3Si2-SiC. The critical loadings of MAs are determined through the Linear Reactivity Model (LRM) in order to keep the same reactivity as the current UO2-zircaloy system at the End of Cycle (EOC). In all cases, excellent transmutation efficiencies are found for the most important three MAs, 237Np, 241Am, and 243Am, of which the total transmutation rates are around 60%, 90%, and 60%, respectively. If only the longest-lived isotope 237Np is considered, one U3Si2-SiC assembly can transmute 237Np from six normal assemblies. The loading of MAs has little influences on the neutronic properties, such as the power distributions inside an assembly and inside a fuel rod. The transmutation of MAs in the ATF assembly is shown to be more efficient and safe comparing with the normal assembly, while other important properties are kept, such as the cycle length and the power distribution.
References in corpus (7)
- Neutronic Analysis on Potential Accident Tolerant Fuel-Cladding Combination USi-FeCrAl
- Radial Distributions of Power and Isotopic Concentrations in Candidate Accident Tolerant Fuel U3Si2 and UO2/U3Si2 Fuel Pins with FeCrAl Cladding
- Isomerism in the "south-east" of Sn and a predicted neutron-decaying isomer in Pd
- Uncertainty decomposition method and its application in the liquid drop model
- The impact of the off-diagonal cross-shell interaction on C
- A simple formula for local burnup based on constant relative reaction rate per nuclei
- Transmutation of Minor Actinides and Power Flattening in PWR MOX Fuel