Self-Powered, Highly Sensitive, High Speed Photodetection Using ITO/WSe2/SnSe2 Vertical Heterojunction

Abstract

Two dimensional transition metal di-chalcogenides (TMDCs) are promising candidates for ultra-low intensity photodetection. However, the performance of these photodetectors is usually limited by ambience induced rapid performance degradation and long lived charge trapping induced slow response with a large persistent photocurrent when the light source is switched off. Here we demonstrate an indium tin oxide (ITO)/WSe${}_2$/SnSe${}_2$ based vertical double heterojunction photoconductive device where the photo-excited hole is confined in the double barrier quantum well, whereas the photo-excited electron can be transferred to either the ITO or the SnSe${}_2$ layer in a controlled manner. The intrinsically short transit time of the photoelectrons in the vertical double heterojunction helps us to achieve high responsivity in excess of $1100$ A/W and fast transient response time on the order of $10$ $\mu$s. A large built-in field in the WSe${}_2$ sandwich layer results in photodetection at zero external bias allowing a self-powered operation mode. The encapsulation from top and bottom protects the photo-active WSe${}_2$ layer from ambience induced detrimental effects and substrate induced trapping effects helping us to achieve repeatable characteristics over many cycles.