Ion backflow studies with a triple-GEM stack with increasing hole pitch
arXiv:1803.09382 · doi:10.1088/1748-0221/13/07/P07025
Abstract
Gas Electron Multipliers have undergone a very consistent development since their invention in 1997. Their production procedures have been tuned in such a way that nowadays it is possible to produce foils with areas of the order of the square meter that can operate at a reasonable gain, uniform over large areas and with a good stability in what concerns electrical discharges. For the third run of LHC, they will be included in the CMS and ALICE experiments after significant upgrades of the detectors, confirming that these structures are suitable for very large experiments. In the special case of Time Projection Chambers, the ion backflow and the energy resolution are sensitive issues that must be addressed and the GEM has shown to be able to deal with both of them. In this work, a stack of three GEMs with different pitches has been studied as a possible future approach for ion-backflow suppression to be used in TPCs and other detection concepts. With this approach, an ion backflow of 1 % with an energy resolution of 12 % at 5.9 keV has been achieved with the detector operating in an Ar/CO2 (90/10) mixture at a gain of ~ 2000.
arXiv comment15 pages, 11 figures
References in corpus (9)
- A concise review on THGEM detectors
- Modelling and Measurement of Charge Transfer in Multiple GEM Structures
- A Time Projection Chamber for High-Rate Experiments: Towards an Upgrade of the ALICE TPC
- Single electron response and energy resolution of a Micromegas detector
- 3D Simulation of Electron and Ion Transmission of GEM-based Detectors
- Effects of High Charge Densities in Multi-GEM Detectors
- Measurements of ion mobility in argon and neon based gas mixtures
- Single electron multiplication distribution in GEM avalanches
- Status of the R&D activities for the upgrade of the ALICE TPC
Cited by in corpus (4)
- Numerical estimation of discharge probability in GEM-based detectors
- Studies on ion back-flow of Time Projection Chamber based on GEM and anode wire grid
- Reduction of ion back flow using a quadruple GEM detector with various gas mixtures
- Effective gain and Ion Back Flow study of triple and quadruple gem detector