Consistent determination of geometrically necessary dislocation density from simulations and experiments

Abstract

The use of Nye's dislocation tensor for calculating the density of geometrically necessary dislocations (GND) is widely adopted in the study of plastically deformed materials. The curl operation involved in finding the Nye tensor, while conceptually straightforward has been marred with inconsistencies and several different definitions are in use. For the three most common definitions, we show that their consistent application leads to the same result. To eliminate frequently encountered confusion, a summary of expressions for Nye's tensor in terms of elastic and plastic deformation gradient, and for both small and large deformations, is presented. A further question when estimating GND density concerns the optimization technique used to solve the under-determined set of equations linking Nye's tensor and GND density. A systematic comparison of the densities obtained by two widely used techniques, L1 and L2 minimisation, shows that both methods yield remarkably similar total GND densities. Thus the mathematically simpler, L2, may be preferred over L1 except when information about the distribution of densities on specific slip systems is required. To illustrate this, we compare experimentally measured lattice distortions beneath nano-indents in pure tungsten, probed using 3D-resolved synchrotron X-ray micro-diffraction, with those predicted by 3D strain-gradient crystal plasticity finite element calculations. The results are in good agreement and show that the volumetric component of the elastic strain field has a surprisingly small effect on the determined Nye tensor. This is important for experimental techniques, such as micro-beam Laue measurements and HR-EBSD, where only the deviatoric strain component is measured.

66 pages, 15 figures, 7 appendices

References in corpus (3)

• Consistent determination of geometrically necessary dislocation density from simulations and experiments
• On fracture in finite strain gradient plasticity
• Distributional and regularized radiation fields of non-uniformly moving straight dislocations, and elastodynamic Tamm problem

Cited by in corpus (16)

• Consistent determination of geometrically necessary dislocation density from simulations and experiments
• Dislocation density distribution at slip band-grain boundary intersections
• Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study
• Scratching the surface: Elastic rotations beneath nanoscratch and nanoindentation tests
• Nanoindentation in multi-modal map combinations: A Correlative Approach to Local Mechanical Property Assessment
• Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations
• Hardening and Strain Localisation in Helium-Ion-Implanted Tungsten
• Dislocation density transients and saturation in irradiated zirconium
• An in-situ synchrotron diffraction study of stress relaxation in titanium: Effect of temperature and oxygen on cold dwell fatigue
• Non-destructive study of collision cascade damage in self-ion irradiated tungsten using HR-EBSD and ECCI
• Orientation-dependent indentation response of helium-implanted tungsten
• Microstructure evolution of compressed micropillars investigated by in situ HR-EBSD analysis and dislocation density simulations
• Computation of Burgers Vectors from Elastic Strain and Lattice Rotation Data
• In situ characterisation of slip bands behaviour in ferrite under mechanical loading
• Cold dwell behaviour of Ti${}_6$Al alloy: Understanding load shedding using digital image correlation and crystal plasticity simulations
• Orientation dependence of the nano-indentation behaviour of pure tungsten