Compact Broadband Low-Loss Taper for Coupling to a Silicon Nitride Photonic Wire
arXiv:1711.09831 · doi:10.1364/OL.43.003433
Abstract
We demonstrate an ultra-compact waveguide taper in Silicon Nitride platform. The proposed taper provides a coupling-efficiency of 95% at a length of 19.5 um in comparison to the standard linear taper of length 50 um that connects a 10 um wide waveguide to a 1 um wide photonic wire. The taper has a spectral response > 75% spanning over 800 nm and resilience to fabrication variations; >200 nm change in taper and end waveguide width varies transmission by <5%. We experimentally demonstrate taper insertion loss of <0.1 dB/transition for a taper as short as 19.5 um, and reduces the footprint of the photonic device by 50.8% compared to the standard adiabatic taper. To the best of our knowledge, the proposed taper is the shortest waveguide taper ever reported in Silicon Nitride.
References in corpus (7)
- All-optical signal processing platforms for CMOS compatible integrated nonlinear optics
- A picogram and nanometer scale photonic crystal opto-mechanical cavity
- Raman induced soliton self-frequency shift in microresonator Kerr frequency combs
- Frequency Comb Generation in 300 nm Thick SiN Concentric-Racetrack-Resonators: Overcoming the Material Dispersion Limit
- A compact and reconfigurable silicon nitride time-bin entanglement circuit
- On-chip two-octave supercontinuum generation by enhancing self-steepening of optical pulses
- Ultra-compact low-loss broadband waveguide taper in silicon-on-insulator