Enhanced detection of high frequency gravitational waves using optically diluted optomechanical filters
arXiv:1711.04469 · doi:10.1103/PhysRevD.97.124060
Abstract
Detections of gravitational waves (GW) in the frequency band 35 Hz to 500 Hz have led to the birth of GW astronomy. Expected signals above 500 Hz, such as the quasinormal modes of lower mass black holes and neutron star mergers signatures are currently not detectable due to increasing quantum shot noise at high frequencies. Squeezed vacuum injection has been shown to allow broadband sensitivity improvement, but this technique does not change the slope of the noise at high frequency. It has been shown that white light signal recycling using negative dispersion optomechanical filter cavities with strong optical dilution for thermal noise suppression can in principle allow broadband high frequency sensitivity improvement. Here we present detailed modelling of AlGaAs/GaAs optomechanical filters to identify the available parameter space in which such filters can achieve the low thermal noise required to allow useful sensitivity improvement at high frequency. Material losses, the resolved sideband condition and internal acoustic modes dictate the need for resonators substantially smaller than previously suggested. We identify suitable resonator dimensions and show that a 30 m scale cat-flap resonator combined with optical squeezing allows 8 fold improvement of strain sensitivity at 2 kHz compared with Advanced LIGO. This corresponds to a detection volume increase of a factor of 500 for sources in this frequency range.
arXiv comment20 pages, 4 figures
References in corpus (33)
- Observation of Gravitational Waves from a Binary Black Hole Merger
- GW170817: Observation of Gravitational Waves from a Binary Neutron Star Inspiral
- GW151226: Observation of Gravitational Waves from a 22-Solar-Mass Binary Black Hole Coalescence
- GW170104: Observation of a 50-Solar-Mass Binary Black Hole Coalescence at Redshift 0.2
- GW170814: A Three-Detector Observation of Gravitational Waves from a Binary Black Hole Coalescence
- Tests of general relativity with GW150914
- Thermoelastic Damping in Micro- and Nano-Mechanical Systems
- Enhancing the sensitivity of the LIGO gravitational wave detector by using squeezed states of light
- A gravitational wave observatory operating beyond the quantum shot-noise limit: Squeezed light in application
- Detection of 15 dB Squeezed States of Light and their Application for the Absolute Calibration of Photoelectric Quantum Efficiency
- Conversion of conventional gravitational-wave interferometers into QND interferometers by modifying their input and/or output optics
- An all-optical trap for a gram-scale mirror
- Quantum noise in second generation, signal-recycled laser interferometric gravitational-wave detectors
- Optical dilution and feedback cooling of a gram-scale oscillator to 6.9 mK
- Quantum Measurement Theory in Gravitational-Wave Detectors
- Observing Gravitational Waves From The Post-Merger Phase Of Binary Neutron Star Coalescence
- Steep anomalous dispersion in coherently prepared Rb vapor
- Demonstration of a Tunable-Bandwidth White Light Interferometer using Anomalous Dispersion in Atomic Vapor
- Scaling law in signal recycled laser-interferometer gravitational-wave detectors
- Audio-band frequency-dependent squeezing
- Enhancing the bandwidth of gravitational-wave detectors with unstable optomechanical filters
- Narrowing the filter cavity bandwidth via optomechanical interaction
- Enhancement of mechanical Q-factors by optical trapping
- Mathematical framework for simulation of quantum fields in complex interferometers using the two-photon formalism
- Direct Measurement of Coating Thermal Noise in Optical Resonators
- Coherent Cancellation of Photothermal Noise in GaAs/AlGaAs Bragg Mirrors
- How to reduce the suspension thermal noise in LIGO without improving the Q's of the pendulum and violin modes
- Binary neutron star merger simulations with different initial orbital frequency and equation of state
- The next detectors for gravitational wave astronomy
- Effect of interference on thermal noise and coating optimization in dielectric mirrors
- Quantum noise of white light cavity using double-pumped gain medium
- Towards thermal noise free optomechanics
- Linear negative dispersion with a gain doublet via optomechanical interactions
Cited by in corpus (9)
- Advanced quantum techniques for future gravitational-wave detectors
- Towards the Design of Gravitational-Wave Detectors for Probing Neutron-Star Physics
- Gravitational wave detectors with broadband high frequency sensitivity
- Quasinormal Modes of a Schwarzschild Black Hole Immersed in an Electromagnetic Universe
- Converting the signal-recycling cavity into an unstable optomechanical filter to enhance the detection bandwidth of gravitational-wave detectors
- Quantum functionalities via feedback amplification
- Nondegenerate internal squeezing: an all-optical, loss-resistant quantum technique for gravitational-wave detection
- Direct approach to realising quantum filters for high-precision measurements
- Enhancing the sensitivity of interferometers with stable phase-insensitive quantum filters