How to reduce the suspension thermal noise in LIGO without improving the Q's of the pendulum and violin modes

Abstract

The suspension noise in interferometric gravitational wave detectors is caused by losses at the top and the bottom attachments of each suspension fiber. We use the Fluctuation-Dissipation theorem to argue that by careful positioning of the laser beam spot on the mirror face it is possible to reduce the contribution of the bottom attachment point to the suspension noise by several orders of magnitude. For example, for the initial and enhanced LIGO design parameters (i.e. mirror masses and sizes, and suspension fibers' lengths and diameters) we predict a reduction of $\sim 100$ in the "bottom" spectral density throughout the band $35-100Hz$ of serious thermal noise. We then propose a readout scheme which suppresses the suspension noise contribution of the top attachment point. The idea is to monitor an averaged horizontal displacement of the fiber of length $l$; this allows one to record the contribution of the top attachment point to the suspension noise, and later subtract it it from the interferometer readout. For enhanced LIGO this would allow a suppression factor about 100 in spectral density of suspension thermal noise.

a few misprints corrected; submitted to Classical and Quantum Gravity

References in corpus (1)

• Internal thermal noise in the LIGO test masses : a direct approach

Cited by in corpus (14)

• Thermodynamical fluctuations and photo-thermal shot noise in gravitational wave antennae
• Analysis of Parametric Oscillatory Instability in Power Recycled LIGO Interferometer
• On line power spectra identification and whitening for the noise in interferometric gravitational wave detectors
• Suspensions Thermal Noise in the LIGO Gravitational Wave Detector
• Noise parametric identification and whitening for LIGO 40-meter interferometer data
• Enhanced detection of high frequency gravitational waves using optically diluted optomechanical filters
• Eliminating Thermal Violin Spikes from LIGO Noise
• Towards thermal noise free optomechanics
• Numerically modeling Brownian thermal noise in amorphous and crystalline thin coatings
• Analysis of parametric oscillatory instability in Fabry-Perot cavity with Gauss and Laguerre-Gauss main mode profile
• Creep events and creep noise in gravitational-wave interferometers: basic formalism and stationary limit
• A theoretical approach to thermal noise caused by an inhomogeneously distributed loss -- Physical insight by the advanced modal expansion
• Reduction and possible elimination of coating thermal noise using a rigidly controlled cavity with a QND technique
• Thermal noise of beam splitters in laser gravitational wave detectors