Boron films produced by high energy Pulsed Laser Deposition
arXiv:1710.07202 · doi:10.1016/j.matdes.2017.08.025
Abstract
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at base pressures of 10 - 10 Pa. A detailed structural analysis, by X-Ray Diffraction and Raman, allowed to assess the amorphous nature of the deposited films as well as to determine the base pressure that prevents boron oxide formation. In addition the crystallization dynamics has been characterized showing that film crystallinity already improves at relatively low temperatures (800 °C). Elastic properties of the boron films have been determined by Brillouin spectroscopy. Finally, micro-hardness tests have been used to explore cohesion and hardness of B films deposited on aluminum, silicon and alumina. The reported deposition strategy allows the growth of reliable boron coatings paving the way for their use in many technology fields.
arXiv commentThe research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554)
References in corpus (9)
- Experimental Realization of Two-Dimensional Boron Sheets
- Hexagonal boron nitride is an indirect bandgap semiconductor
- Ionic high-pressure form of elemental boron
- Structural attributes and photo-dynamics of visible spectrum quantum emitters in hexagonal boron nitride
- On the Hardness of a New Boron Phase, Orthorhombic γ-B28
- Thermodynamic model of hardness: Particular case of boron-rich solids
- Amorphous, ultra-nano- and nano-crystalline tungsten-based coatings grown by Pulsed Laser Deposition: mechanical characterization by Surface Brillouin Spectroscopy
- Comparative study of in situ and ex situ MgB2 films deposited by pulsed laser deposition
- Off-axis MgB2 films using an in situ annealing pulsed laser deposition method