Wrinkled few-layer graphene as highly efficient load bearer
arXiv:1708.02988 · doi:10.1021/acsami.7b07547
Abstract
Multilayered graphitic materials are not suitable as load-bearers due to their inherent weak interlayer bonding (for example, graphite is a solid lubricant in certain applications). This situation is largely improved when two-dimensional (2-D) materials such as a monolayer (SLG) graphene are employed. The downside in these cases is the presence of thermally or mechanically induced wrinkles which are ubiquitous in 2-D materials. Here we set out to examine the effect of extensive large wavelength/ amplitude wrinkling on the stress transfer capabilities of exfoliated simply-supported graphene flakes. Contrary to common belief we present clear evidence that this type of "corrugation" enhances the load bearing capacity of few-layer graphene as compared to 'flat' specimens. This effect is the result of the significant increase of the graphene/polymer interfacial shear stress per increment of applied strain due to wrinkling and paves the way for designing affordable graphene composites with highly improved stress-transfer efficiency.
20 pages, 6 figures
References in corpus (21)
- Electric Field Effect in Atomically Thin Carbon Films
- Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils
- Uniaxial Strain in Graphene by Raman Spectroscopy: G peak splitting, Gruneisen Parameters and Sample Orientation
- Intrinsic ripples in graphene
- Interfacial Stress Transfer in a Graphene Monolayer Nanocomposite
- Subjecting a graphene monolayer to tension and compression
- Elastic Bending Modulus of Monolayer Graphene
- Raman 2D-Band Splitting in Graphene: Theory and Experiment
- Compression Behavior of Single-layer Graphene
- The Effect of Intrinsic Crumpling on the Mechanics of Free-Standing Graphene
- Breakdown of continuum mechanics for nanometer-wavelength rippling of graphene
- From Graphene to Carbon Fibres: Mechanical Deformation and Development of a Universal Stress Sensor
- The deformation of wrinkled graphene
- Annealing Free, Clean Graphene Transfer using Alternative Polymer Scaffolds
- Stress Transfer Mechanisms at the Submicron Level for Graphene/Polymer Systems
- Graphenes flakes under controlled biaxial deformation
- Failure Processes in Embedded Monolayer Graphene under Axial Compression
- Experimentally derived axial stress- strain relations for two-dimensional materials such as monolayer graphene
- Strain Assessment in Graphene Through the Raman 2D' Mode
- Compression behavior of simply-supported and fully embedded monolayer graphene: theory and experiment
- Stress and charge transfer in uniaxially strained CVD graphene
Cited by in corpus (6)
- Tunable macroscale structural superlubricity in two-layer graphene via strain engineering
- Stress-transfer from polymer substrates to monolayer and few-layer graphenes
- Enhancing the Adhesion of Graphene to Polymer Substrates by Controlled Defect Formation
- Large intravalley scattering due to pseudo-magnetic fields in crumpled graphene
- Non-Eulerian behavior of graphitic materials under compression
- Spin-polarized currents in corrugated graphene nanoribbons