SKA Aperture Array Verification System: Electromagnetic modeling and beam pattern measurements using a micro UAV
arXiv:1703.00537 · doi:10.1007/s10686-017-9566-x
Abstract
In this paper we present the electromagnetic modeling and beam pattern measurements of a 16-elements ultra wideband sparse random test array for the low frequency instrument of the Square Kilometer Array telescope. We discuss the importance of a small array test platform for the development of technologies and techniques towards the final telescope, highlighting the most relevant aspects of its design. We also describe the electromagnetic simulations and modeling work as well as the embedded-element and array pattern measurements using an Unmanned Aerial Vehicle system. The latter are helpful both for the validation of the models and the design as well as for the future instrumental calibration of the telescope thanks to the stable, accurate and strong radio frequency signal transmitted by the UAV. At this stage of the design, these measurements have shown a general agreement between experimental results and numerical data and have revealed the localized effect of un-calibrated cable lengths in the inner side-lobes of the array pattern.
arXiv comment19 pages, 17 figures. Accepted in Experimental Astronomy
References in corpus (3)
Cited by in corpus (7)
- The REACH radiometer for detecting the 21-cm hydrogen signal from redshift 7.5 to 28
- Design of the New Wideband Vivaldi Feed for the HERA Radio-Telescope Phase II
- Measuring HERA's primary beam in-situ: methodology and first results
- Exploring the cosmic dawn and epoch of reionization with 21cm line
- Accuracy vs. Complexity: Calibrating radio interferometer arrays with non-homogeneous element patterns
- The Aperture Array Verification System 1: System overview and early commissioning results
- Implementation of MUAV as reference source for GLAO systems