Gyrokinetic projection of the divertor heat-flux width from present tokamaks to ITER

Abstract

The XGC1 edge gyrokinetic code is used for a high fidelity prediction for the width of the heat-flux to divertor plates in attached plasma condition. The simulation results are validated against the empirical scaling ${\lambda }_q\propto B_P^{-\gamma }$ obtained from present tokamak devices, where ${\lambda }_q$ is the divertor heat-flux width mapped to the outboard midplane and ${\gamma }_q=1.19$ as defined by T. Eich et al. [Nucl. Fusion 53 (2013) 093031], and $B_P$ is the magnitude of the poloidal magnetic field at outboard midplane separatrix surface. This empirical scaling predicts ${\lambda }_q\le 1mm$ when extrapolated to ITER, which would require operation with very high separatrix densities $(n_{sep}/n_{Greenwald}>0.6)$ in the Q=10 scenario to achieve semi-detached plasma operation and high radiative fractions leading to acceptable divertor power fluxes. XGC1 predicts, however, that ${\lambda }_q$ for ITER is over 5 mm, suggesting that operation in the ITER Q=10 scenario with acceptable divertor power loads could be obtained over a wider range of plasma separatrix densities and radiative fractions. The physics reason behind this difference is, according to the XGC1 results, that while the ion magnetic drift contribution to the divertor heat-flux width is wider in the present tokamaks, the turbulent electron contribution is wider in ITER. A high current C-Mod discharge is found to be in a mixed regime: While the heat-flux width by the ion neoclassical magnetic drift is still wider than the turbulent electron heat-flux width, the heat-flux magnitude is dominated by the narrower electron heat-flux.

Submitted to Nuclear Fusion

References in corpus (3)

• A fast low-to-high mode bifurcation dynamics in a tokamak edge plasma gyrokinetic simulation
• Pedestal and edge turbulence characteristics from an XGC1 gyrokinetic simulation
• Kinetic modeling of divertor heat load fluxes in the Alcator C-Mod and DIII-D tokamaks

Cited by in corpus (26)

• Gyrokinetic analysis and simulation of pedestals, to identify the culprits for energy losses using fingerprints
• The GBS code for the self-consistent simulation of plasma turbulence and kinetic neutral dynamics in the tokamak boundary
• Validation of edge turbulence codes against the TCV-X21 diverted L-mode reference case
• Direct Gyrokinetic Comparison of Pedestal Transport in JET with Carbon and ITER-Like Walls
• Constructing a new predictive scaling formula for ITER's divertor heat-load width informed by a simulation-anchored machine learning
• Deep learning based surrogate model for first-principles global simulations of fusion plasmas
• Theory-based scaling laws of near and far scrape-off layer widths in single-null L-mode discharges
• Global gyrokinetic simulations of ASDEX Upgrade up to the transport time-scale with GENE-Tango
• Full-$f$ gyrokinetic simulation of turbulence in a helical open-field-line plasma
• Kinetic modeling of neutral transport for a continuum gyrokinetic code
• Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D
• Magnetic flutter effect on validated edge turbulence simulations
• Role of Poloidal $\mathbf{E}\times \mathbf{B}$ Drift in Divertor Heat Transport in DIII-D
• Fluid & Gyrokinetic turbulence in open field-line, helical plasmas
• Electromagnetic turbulence simulation of tokamak edge plasma dynamics and divertor heat load during thermal quench
• Development and testing of an unstructured mesh method for whole plasma gyrokinetic simulations in realistic tokamak geometry
• Verification of a Fully Implicit Particle-in-Cell Method for the $v_{\parallel }$ Formalism of Electromagnetic Gyrokinetics in the XGC Code
• Full-F Turbulent Simulation in a Linear Device using a Gyro-Moment Approach
• Transport Barrier and Spinning Blob Dynamics in the Tokamak Edge
• Turbulent broadening of electron heat-flux width in electromagnetic gyrokinetic simulations of a helical scrape-off layer model
• Simulations of scrape-off layer power width for EAST H-mode plasma and ITER 15 MA baseline scenario by 2D electrostatic turbulence code
• Comparison of edge turbulence characteristics between DIII-D and C-Mod simulations with XGC1
• Analysis of equilibrium and turbulent fluxes across the separatrix in a gyrokinetic simulation
• Experimental scaling of the scrape-off layer particle flux width by outboard divertor Langmuir probes with favorable Bt configuration on EAST
• Intrinsic toroidal rotation driven by turbulent and neoclassical processes in tokamak plasmas from global gyrokinetic simulations
• Multiscale Modelling for Tokamak Pedestals