Design of 280 GHz feedhorn-coupled TES arrays for the balloon-borne polarimeter SPIDER
arXiv:1606.09396 · doi:10.1117/12.2231896
Abstract
We describe 280 GHz bolometric detector arrays that instrument the balloon-borne polarimeter SPIDER. A primary science goal of SPIDER is to measure the large-scale B-mode polarization of the cosmic microwave background in search of the cosmic-inflation, gravitational-wave signature. 280 GHz channels aid this science goal by constraining the level of B-mode contamination from galactic dust emission. We present the focal plane unit design, which consists of a 1616 array of conical, corrugated feedhorns coupled to a monolithic detector array fabricated on a 150 mm diameter silicon wafer. Detector arrays are capable of polarimetric sensing via waveguide probe-coupling to a multiplexed array of transition-edge-sensor (TES) bolometers. The SPIDER receiver has three focal plane units at 280 GHz, which in total contains 765 spatial pixels and 1,530 polarization sensitive bolometers. By fabrication and measurement of single feedhorns, we demonstrate 14.7 FHWM Gaussian-shaped beams with 1% ellipticity in a 30% fractional bandwidth centered at 280 GHz. We present electromagnetic simulations of the detection circuit, which show 94% band-averaged, single-polarization coupling efficiency, 3% reflection and 3% radiative loss. Lastly, we demonstrate a low thermal conductance bolometer, which is well-described by a simple TES model and exhibits an electrical noise equivalent power (NEP) = 2.6 10 W/, consistent with the phonon noise prediction.
arXiv commentProceedings of SPIE Astronomical Telescopes + Instrumentation 2016
References in corpus (12)
- BICEP2 I: Detection Of B-mode Polarization at Degree Angular Scales
- A Joint Analysis of BICEP2/Keck Array and Planck Data
- BICEP2 / Keck Array VI: Improved Constraints On Cosmology and Foregrounds When Adding 95 GHz Data From Keck Array
- Advanced ACTPol Cryogenic Detector Arrays and Readout
- The Atacama Cosmology Telescope: The polarization-sensitive ACTPol instrument
- The POLARBEAR-2 and the Simons Array Experiment
- SPIDER: Probing the Early Universe with a Suborbital Polarimeter
- Antenna-coupled TES bolometers used in BICEP2, Keck array, and SPIDER
- The Thermal Design, Characterization, and Performance of the SPIDER Long-Duration Balloon Cryostat
- Complex impedance measurements of calorimeters and bolometers: correction for stray impedances
- Design and Deployment of a Multichroic Polarimeter Array on the Atacama Cosmology Telescope
- The Atacama B-Mode Search: CMB Polarimetry with Transition-Edge-Sensor Bolometers
Cited by in corpus (9)
- The LiteBIRD Satellite Mission - Sub-Kelvin Instrument
- Review: Far-Infrared Instrumentation and Technology Development for the Next Decade
- SPIDER: CMB polarimetry from the edge of space
- Microwave SQUID Multiplexer demonstration for Cosmic Microwave Background Imagers
- 280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter
- Response of a Cold-Electron Bolometer in a coplanar antenna system
- BFORE: A CMB Balloon Payload to Measure Reionization, Neutrino Mass, and Cosmic Inflation
- In-Flight Performance of Spider's 280 GHz Receivers
- Optical leakage mitigation in ortho-mode transducer detectors for microwave applications