Faraday cage angled-etching of nanostructures in bulk dielectrics
arXiv:1603.03735 · doi:10.1116/1.4944854
Abstract
For many emerging optoelectronic materials, heteroepitaxial growth techniques do not offer the same high material quality afforded by bulk, single-crystal growth. However, the need for optical, electrical, or mechanical isolation at the nanoscale level often necessitates the use of a dissimilar substrate, upon which the active device layer stands. Faraday cage angled-etching (FCAE) obviates the need for these planar, thin-film technologies by enabling in-situ device release and isolation through an angled-etching process. By placing a Faraday cage around the sample during inductively-coupled plasma reactive ion etching (ICP-RIE), the etching plasma develops an equipotential at the cage surface, directing ions normal to its face. In this Article, the effects Faraday cage angle, mesh size, and sample placement have on etch angle, uniformity, and mask selectivity are investigated within a silicon etching platform. Simulation results qualitatively confirm experiments and help to clarify the physical mechanisms at work. These results will help guide FCAE process design across a wide range of material platforms.
References in corpus (13)
- High-Q optical nanocavities in bulk single-crystal diamond
- Integrated high quality factor lithium niobate microdisk resonators
- Integrated diamond networks for quantum nanophotonics
- Integrated GaN photonic circuits on silicon (100) for second harmonic generation
- Nanophotonic coherent light-matter interfaces based on rare-earth-doped crystals
- On-Chip Diamond Raman Laser
- Design and Focused Ion Beam Fabrication of Single Crystal Diamond Nanobeam Cavities
- Nanomechanical resonant structures in single-crystal diamond
- Triangular nanobeam photonic cavities in single crystal diamond
- Single crystal diamond nanobeam waveguide optomechanics
- Superconducting Nanowire Single Photon Detector on Diamond
- Fabrication of Triangular Nanobeam Waveguide Networks in Bulk diamond Using Single-Crystal Silicon Hard Masks
- Waveguide-loaded silica fibers for coupling to high-index micro-resonators
Cited by in corpus (8)
- Diamond optomechanical crystals
- A fiber-coupled diamond quantum nanophotonic interface
- Strongly Cavity-Enhanced Spontaneous Emission from Silicon-Vacancy Centers in Diamond
- Development of hard masks for reactive ion beam angled etching of diamond
- Mechanical and optical nanodevices in single-crystal quartz
- Fabrication of Sawfish photonic crystal cavities in bulk diamond
- Development of All-Diamond Scanning Probes Based on Faraday Cage Angled Etching Techniques
- Homogeneous Free-Standing Nanostructures from Bulk Diamond over Millimeter Scales for Quantum Technologies