Calibrating conservative and dissipative response of electrically-driven quartz tuning forks
arXiv:1602.08920 · doi:10.1016/j.ultramic.2016.12.015
Abstract
Determining sensor parameters is a prerequisite for quantitative force measurement. Here we report a direct, high-precision calibration method for quartz tuning fork(TF) sensors that are popular in the feld of nanomechanical measurement. In the method, conservative and dissipative forces with controlled amplitudes are applied to one prong of TF directly to mimic the tip-sample interaction, and the responses of the sensor are measured at the same time to extract sensor parameters. The method, for the frst time, allows force gradient and damping coeffcient which correspond to the conservative and dissipative interactions to be measured simultaneously. The calibration result shows surprisingly that, unlike cantilevers, the frequency shift for TFs depends on both the conservative and dissipative forces, which may be ascribed to the complex dynamics. The effectiveness of the method is testifed by force spectrum measurement with a calibrated TF. The method is generic for all kinds of sensors used for non-contact atomic force microscopy(NC-AFM) and is an important improvement for quantitative nanomechanical measurement.
References in corpus (6)
- Dynamics of quartz tuning fork force sensors used in scanning probe microscopy
- Force-gradient-induced mechanical dissipation of quartz tuning fork force sensors used in atomic force microscopy
- Force-distance studies with piezoelectric tuning forks below 4.2 K
- Carbon fibre tips for scanning probe microscopy based on quartz tuning fork force sensors
- Application of the equipartition theorem to the thermal excitation of quartz tuning forks
- A Hybrid Analog/Digital Phase-Locked Loop for Frequency Mode Non-contact Scanning Probe Microscopy