Active compensation of aperture discontinuities for WFIRST-AFTA: analytical and numerical comparison of propagation methods and preliminary results with a WFIRST-AFTA-like pupil
arXiv:1511.01929 · doi:10.1117/1.JATIS.2.1.011008
Abstract
The new frontier in the quest for the highest contrast levels in the focal plane of a coronagraph is now the correction of the large diffractive artifacts effects introduced at the science camera by apertures of increasing complexity. The coronagraph for the WFIRST/AFTA mission will be the first of such instruments in space with a two Deformable Mirrors wavefront control system. Regardless of the control algorithm for these multi Deformable Mirrors, they will have to rely on quick and accurate simulation of the propagation effects introduced by the out-of-pupil surface. In the first part of this paper, we present the analytical description of the different approximations to simulate these propagation effects. In Annex A, we prove analytically that, in the special case of surfaces inducing a converging beam, the Fresnel method yields high fidelity for simulations of these effects. We provide numerical simulations showing this effect. In the second part, we use these tools in the framework of the Active Compensation of Aperture Discontinuities technique (ACAD) applied to pupil geometries similar to WFIRST-AFTA. We present these simulations in the context of the optical layout of the High-contrast imager for Complex Aperture Telescopes, which will test ACAD on a optical bench. The results of this analysis show that using the ACAD method, an apodized pupil lyot coronagraph and the performance of our current deformable mirrors, we are able to obtain, in numerically simulations, a dark hole with an AFTA-like pupil. Our numerical simulation shows that we can obtain contrast better than in monochromatic light and better than 3.e-8 with 10% bandwidth between 5 and 14 lambda/D.
16 pages, 5 figures, Accepted for publication (Oct. 23, 2015) in Journal of Astronomical Telescopes, Instruments, and Systems, special WFIRST-AFTA coronagraph
References in corpus (7)
- Optimal Dark Hole Generation via Two Deformable Mirrors with Stroke Minimization
- High Contrast Imaging with an Arbitrary Aperture: Active Correction of Aperture Discontinuities
- Apodized Pupil Lyot Coronagraphs for Arbitrary Apertures. IV. Reduced Inner Working Angle and Increased Robustness to Low-Order Aberrations
- High-contrast imaging in polychromatic light with the self-coherent camera
- Design of PIAA coronagraphs over square apertures
- Active correction of aperture discontinuities (ACAD) for space telescope pupils: a parametic analysis
- High-contrast imager for Complex Aperture Telescopes (HiCAT): 2. Design overview and first light results
Cited by in corpus (6)
- Active correction of aperture discontinuities - optimized stroke minimization II: optimization for future missions
- Active correction of aperture discontinuities - optimized stroke minimization I: a new adaptive interaction matrix algorithm
- Review of high-contrast imaging systems for current and future ground- and space-based telescopes I. Coronagraph design methods and optical performance metrics
- Fundamental limits to high-contrast wavefront control
- Capabilities of ACAD-OSM, an active method for the correction of aperture discontinuities
- Correcting for the effects of pupil discontinuities with the ACAD method