Enhanced Optomechanical Levitation of Minimally Supported Dielectrics

Abstract

Optically levitated mechanical sensors promise isolation from thermal noise far beyond what is possible using flexible materials alone. One way to access this potential is to apply a strong optical trap to a minimally supported mechanical element, thereby increasing its quality factor $Q_m$. Current schemes, however, require prohibitively high laser power ($\sim 10$ W), and the $Q_m$ enhancement is ultimately limited to a factor of $\sim$ 50 by hybridization between the trapped mode and the dissipative modes of the supporting structure. Here we propose a levitation scheme taking full advantage of an optical resonator to reduce the circulating power requirements by many orders of magnitude. Applying this scheme to the case of a dielectric disk in a Fabry-Perot cavity, we find a tilt-based tuning mechanism for optimizing both center-of-mass and torsional mode traps. Notably, the two modes are trapped with comparable efficiency, and we estimate that a 10-micron-diameter, 100-nm-thick Si disc could be trapped to a frequency of $\sim$ 10 MHz with only $30$ mW circulating in a cavity of (modest) finesse 1500. Finally, we simulate the effect such a strong trap would have on a realistic doubly-tethered disc. Of central importance, we find torsional motion is comparatively immune to $Q_m$-limiting hybridization, allowing a $Q_m$ enhancement factor of $\sim$ 1500. This opens the possibility of realizing a laser-tuned 10 MHz mechanical system with a quality factor of order a billion.

10 pages, 6 figures

References in corpus (13)

• Sideband Cooling Micromechanical Motion to the Quantum Ground State
• Strong dispersive coupling of a high finesse cavity to a micromechanical membrane
• Cavity Optomechanics
• Coherent optical wavelength conversion via cavity-optomechanics
• Opto-mechanical transducers for long-distance quantum communication
• Observation of Radiation Pressure Shot Noise on a Macroscopic Object
• Dispersive optomechanics: a membrane inside a cavity
• Proposal for an Optomechanical Traveling Wave Phonon-Photon Translator
• Optomechanical trapping and cooling of partially transparent mirrors
• Optical wavelength conversion of quantum states with optomechanics
• Observation of generalized optomechanical coupling and cooling on cavity resonance
• Standard Quantum Limit for Probing Mechanical Energy Quantization
• From membrane-in-the-middle to mirror-in-the-middle with a high-reflectivity sub-wavelength grating

Cited by in corpus (1)

• Parametric amplification of light in a cavity with a moving dielectric membrane: Landau-Zener problem for the Maxwell field