Normal Metal Hot-Electron Nanobolometer with Johnson Noise Thermometry Readout

Abstract

The sensitivity of a THz hot-electron nanobolometer (nano-HEB) made from a normal metal is analyzed. Johnson Noise Thermometry (JNT) is employed as a readout technique. In contrast to its superconducting TES counterpart, the normal-metal nano-HEB can operate at any cryogenic temperature depending on the required radiation background limited Noise Equivalent Power (NEP). It does not require bias lines; 100s of nano-HEBs can be read by a single low-noise X-band amplifier via a filter bank channelizer. The modeling predicts that even with the sensitivity penalty due to the amplifier noise, an NEP ~ 10${}^{-20}$ - 10${}^{-19}$ W/Hz${}^{1/2}$ can be expected at 50-100 mK in 10-20 nm thin titanium (Ti) normal metal HEBs with niobium (Nb) contacts. This NEP is fairly constant over a range of readout frequencies ~ 10 GHz. Although materials with weaker electron-phonon coupling (bismuth, graphene) do not improve the minimum achievable NEP, they can be considered if a larger than 10 GHz readout bandwidth is required.

arXiv comment5 pages, 5 figures, presented at the 25th International Symposium on Space Terahertz Technology (Moscow, Russia, 27-30 April 2014)

References in corpus (10)

• Ultra-Sensitive Hot-Electron Nanobolometers for Terahertz Astrophysics
• Hot electron cooling by acoustic phonons in graphene
• A readout for large arrays of Microwave Kinetic Inductance Detectors
• Fluctuations in the electron system of a superconductor exposed to a photon flux
• Nanobolometers for THz Photon Detection
• Millisecond Electron-Phonon Relaxation in Ultrathin Disordered Metal Films at Millikelvin Temperatures
• Single crystal silicon capacitors with low microwave loss in the single photon regime
• Strongly quadrature-dependent noise in superconducting micro-resonators measured at the vacuum-noise limit
• Prospective performance of graphene HEB for ultrasensitive detection of sub-mm radiation
• Superconducting microstrip amplifiers with sub-Kelvin noise temperature near 4 GHz