Frequency Comb-Based Remote Sensing of Greenhouse Gases over Kilometer Air Paths
arXiv:1406.3326
Abstract
We demonstrate coherent dual frequency-comb spectroscopy for detecting variations in greenhouse gases. High signal-to-noise spectra are acquired spanning 5990 to 6260 cm^-1 (1600 to 1670 nm) covering ~700 absorption features from CO2, CH4, H2O, HDO, and 13CO2, across a 2-km open-air path. The transmission of each frequency comb tooth is resolved, leading to spectra with <1 kHz frequency accuracy, no instrument lineshape, and a 0.0033-cm^-1 point spacing. The fitted path-averaged concentrations and temperature yield dry-air mole fractions. These are compared with a point sensor under well-mixed conditions to evaluate current absorption models for real atmospheres. In heterogeneous conditions, time-resolved data demonstrate tracking of strong variations in mole fractions. A precision of <1 ppm for CO2 and <3 ppb for CH4 is achieved in 5 minutes in this initial demonstration. Future portable systems could support regional emissions monitoring and validation of the spectral databases critical to global satellite-based trace gas monitoring.
References in corpus (9)
- Mid-infrared frequency combs
- Cavity-enhanced dual-comb spectroscopy
- Coherent Raman spectro-imaging with laser frequency combs
- Adaptive real-time dual-comb spectroscopy
- Coherent Dual Comb Spectroscopy at High Signal to Noise
- Spectroscopy of the Methane ν3 Band with an Accurate Mid-Infrared Coherent Dual- Comb Spectrometer
- Operation of an optically coherent frequency comb outside the metrology lab
- High-power, hybrid Er:fiber/Tm:fiber frequency comb source in the 2 μm wavelength region
- Spectroscopic measurements of a CO2 absorption line in an open vertical path using an airborne lidar