Construction, Measurement, Shimming, and Performance of the NIST-4 Magnet System

Abstract

The magnet system is one of the key elements of a watt balance. For the new watt balance currently under construction at the National Institute of Standards and Technology, a permanent magnet system was chosen. We describe the detailed construction of the magnet system, first measurements of the field profile, and shimming techniques that were used to achieve a flat field profile. The relative change of the radial magnetic flux density is less than $10^{-4}$ over a range of 5 cm. We further characterize the most important aspects of the magnet and give order of magnitude estimates for several systematic effects that originate from the magnet system.

arXiv commentv2: changed layout; 13 pages, 15 figures. published in IEEE Trans. Instrum. Meas. 63, 3027-3028 (2014), http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6827217&isnumber=6940066

References in corpus (1)

• Determination of the Planck constant using a watt balance with a superconducting magnet system at the National Institute of Standards and Technology

Cited by in corpus (10)

• Measurement of the Planck constant at the National Institute of Standards and Technology from 2015 to 2017
• Coils and the Electromagnet Used in the Joule Balance at the NIM
• Progress on accurate measurement of the Planck constant: watt balance and counting atoms
• The irony of the magnet system for Kibble balances -- a review
• Magnet system for the Quantum Electro-Mechanical Metrology Suite
• Field representation of a watt balance magnet by partial profile measurements
• First measurements of the flux integral with the NIST-4 watt balance
• Calculation of magnetic forces and torques on the Kibble coil
• A discussion of $Bl$ conservation on a two dimensional magnetic field plane in watt balances
• An analytical algorithm for 3D magnetic field mapping of a watt balance magnet