Modeling and stabilizability of voltage-actuated piezoelectric beams with magnetic effects
arXiv:1312.0260 · doi:10.1137/130918319
Abstract
Models for piezoelectric beams and structures with piezoelectric patches generally ignore magnetic effects. This is because the magnetic energy has a relatively small effect on the overall dynamics. Piezoelectric beam models are known to be exactly observable, and can be exponentially stabilized in the energy space by using a mechanical feedback controller. In this paper, a variational approach is used to derive a model for a piezoelectric beam that includes magnetic effects. It is proven that the partial differential equation model is well-posed. Magnetic effects have a strong effect on the stabilizability of the control system. For almost all system parameters the piezoelectric beam can be strongly stabilized, but is not exponentially stabilizable in the energy space. Strong stabilization is achieved using only electrical feedback. Furthermore, using the same electrical feedback, an exponentially stable closed-loop system can be obtained for a set of system parameters of zero Lebesgue measure. These results are compared to those of a beam without magnetic effects.
29 pages, 1 figure, 1 table
Cited by in corpus (15)
- Modeling and controlling an active constrained layer (ACL) beam actuated by two voltage sources with/without magnetic effects
- Further stabilization results for voltage-actuated piezoelectric beams with magnetic effects
- Stability of pizoelectric beam with magnetic effect under (Coleman or Pipkin)-Gurtin thermal law
- Modeling and semigroup formulation of charge or current-controlled active constrained layer (ACL) beams; electrostatic, quasi-static, and fully-dynamic assumptions
- Dynamic and electrostatic modeling for a piezoelectric smart composite and related stabilization results
- Exponential Stability and Design of Sensor Feedback Amplifiers for Fast Stabilization of Magnetizable Piezoelectric Beam Equations
- Nonlinear modeling and preliminary stabilization results for a class of piezoelectric smart composite beams
- Exponential stabilization of a smart piezoelectric composite beam with only one boundary controller
- Stability of piezoelectric beams with magnetic effects of fractional derivative type and with/without thermal effects
- Modeling and related results for current-actuated piezoelectric beams by including magnetic effects
- Piezoelectric beam with magnetic effect, time-varying delay and time-varying weights
- Novel current actuated piezoelectric composite model with fully dynamic electromagnetic field
- Exponential stabilization for magnetic effected piezoelectric beams with time-varying delay and time-dependent weights
- Polynomial stability of piezoelectric beams with magnetic effect and tip body
- Output Control of Smart Beams under Uncertain Dynamic Loads through Non-Collocated Sensors and Actuators