Dead layer on silicon p-i-n diode charged-particle detectors
arXiv:1310.1178 · doi:10.1016/j.nima.2013.12.048
Abstract
Semiconductor detectors in general have a dead layer at their surfaces that is either a result of natural or induced passivation, or is formed during the process of making a contact. Charged particles passing through this region produce ionization that is incompletely collected and recorded, which leads to departures from the ideal in both energy deposition and resolution. The silicon \textit{p-i-n} diode used in the KATRIN neutrino-mass experiment has such a dead layer. We have constructed a detailed Monte Carlo model for the passage of electrons from vacuum into a silicon detector, and compared the measured energy spectra to the predicted ones for a range of energies from 12 to 20 keV. The comparison provides experimental evidence that a substantial fraction of the ionization produced in the "dead" layer evidently escapes by diffusion, with 46% being collected in the depletion zone and the balance being neutralized at the contact or by bulk recombination. The most elementary model of a thinner dead layer from which no charge is collected is strongly disfavored.
Manuscript submitted to NIM A
References in corpus (2)
Cited by in corpus (9)
- Focal-plane detector system for the KATRIN experiment
- A novel detector system for KATRIN to search for keV-scale sterile neutrinos
- Kassiopeia: A Modern, Extensible C++ Particle Tracking Package
- First operation of the KATRIN experiment with tritium
- On Determining Dead Layer and Detector Thicknesses for a Position-Sensitive Silicon Detector
- Analysis of the attainable efficiency of a direct-bandgap betavoltaic element
- Precision pulse shape simulation for proton detection at the Nab experiment
- Silicon PIN diodes as Neganov-Trofimov-Luke cryogenic light detectors
- Characterization of Low-energy Ionization Signals in Silicon Detectors for the Nab Experiment