Design and Commissioning of the LWA1 Radio Telescope
arXiv:1307.0697 · doi:10.1109/ARRAY.2013.6731927
Abstract
LWA1 is a new large radio telescope array operating in the frequency range 10-88 MHz, located in central New Mexico. The telescope consists of 260 pairs of dipole-type antennas whose outputs are individually digitized and formed into beams. Simultaneously, signals from all dipoles can be recorded using one of the telescope's "all dipoles" modes, facilitating all-sky imaging. Notable features of the instrument include four independently-steerable beams utilizing digital "true time delay" beamforming, high intrinsic sensitivity (about 6 kJy zenith system equivalent flux density), large instantaneous bandwidth (up to 78 MHz), and large field of view (about 3-10 degrees, depending on frequency and zenith angle of pointing). This paper summarizes the design of LWA1, its performance as determined in commissioning experiments, and results from early science observations demonstrating the capabilities of the instrument.
arXiv comment8 pages, 16 figures, 4 tables, to appear in 2013 IEEE International Symposium on Phased Array Systems & Technology
References in corpus (7)
- LOFAR: The LOw-Frequency ARray
- The LWA1 Radio Telescope
- The 74MHz System on the Very Large Array
- A wide-band, active antenna system for long wavelength radio astronomy
- Sensitivity of Antenna Arrays for Long-Wavelength Radio Astronomy
- Observations of Crab Giant Pulses in 20-84 MHz using LWA1
- Detection and Flux Density Measurements of the Millisecond Pulsar J2145-0750 below 100 MHz