Resistance switching in oxides with inhomogeneous conductivity
arXiv:1304.3290 · doi:10.1088/1674-1056/22/6/067202
Abstract
Electric-field-induced resistance switching (RS) phenomena have been studied for over 60 years in metal/dielectrics/metal structures. In these experiments a wide range of dielectrics have been studied including binary transition metal oxides, perovskite oxides, chalcogenides, carbon- and silicon-based materials, as well as organic materials. RS phenomena can be used to store information and offer an attractive performance, which encompasses fast switching speeds, high scalability, and the desirable compatibility with Si-based complementary-metal-oxide-semiconductor fabrication. This is promising for nonvolatile memory technology, i.e. resistance random access memory (RRAM). However, a comprehensive understanding of the underlying mechanism is still lacking. This impedes a faster product development as well as an accurate assessment of the device performance potential. Generally speaking, RS occurs not in the entire dielectric but only a small, confined region, which results from the local variation of conductivity in dielectrics. In this review, we focus on the RS in oxides with such an inhomogeneous conductivity. According to the origin of the conductivity inhomogeneity, the RS phenomena and their working mechanism are reviewed by dividing them into two aspects: interface RS, based on the change of contact resistance at metal/oxide interface due to the change of Schottky barrier and interface chemical layer, and bulk RS, realized by the formation, connection, and disconnection of conductive channels in the oxides. Finally the current challenges of RS investigation and the potential improvement of the RS performance for the nonvolatile memories are discussed.
arXiv comment36 pages, 20 figures
References in corpus (4)
- Hysteretic current-voltage characteristics and resistance switching at a rectifying Ti/PrCaMnO interface
- Evidance for an Oxygen Diffusion Model for the Electric Pulse Induced Resistance Change Effect in Oxides
- Nonpolar resistance switching of metal/binary-transition-metal oxides/metal sandwiches: homogeneous/inhomogeneous transition of current distribution
- Pt/Ti/Al2O3/Al tunnel junctions showing electroforming-free bipolar resistive switching behavior