Inhomogeneous mechanical losses in micro-oscillators with high reflectivity coating
arXiv:1203.0433 · doi:10.1063/1.4728217
Abstract
We characterize the mechanical quality factor of micro-oscillators covered by a highly reflective coating. We test an approach to the reduction of mechanical losses, that consists in limiting the size of the coated area to reduce the strain and the consequent energy loss in this highly dissipative component. Moreover, a mechanical isolation stage is incorporated in the device. The results are discussed on the basis of an analysis of homogeneous and non-homogeneous losses in the device and validated by a set of Finite-Element models. The contributions of thermoelastic dissipation and coating losses are separated and the measured quality factors are found in agreement with the calculated values, while the absence of unmodeled losses confirms that the isolation element integrated in the device efficiently uncouples the dynamics of the mirror from the support system. Also the resonant frequencies evaluated by Finite-Element models are in good agreement with the experimental data, and allow the estimation of the Young modulus of the coating. The models that we have developed and validated are important for the design of oscillating micro-mirrors with high quality factor and, consequently, low thermal noise. Such devices are useful in general for high sensitivity sensors, and in particular for experiments of quantum opto-mechanics.
References in corpus (15)
- Sideband Cooling Micromechanical Motion to the Quantum Ground State
- Optomechanically induced transparency
- Electromagnetically Induced Transparency and Slow Light with Optomechanics
- Strong dispersive coupling of a high finesse cavity to a micromechanical membrane
- Optomechanical entanglement between a movable mirror and a cavity field
- Observation of strong coupling between a micromechanical resonator and an optical cavity field
- Radiation-pressure cooling and optomechanical instability of a micro-mirror
- Self-cooling of a micro-mirror by radiation pressure
- Resolved Sideband Cooling of a Micromechanical Oscillator
- Back-action evasion and squeezing of a mechanical resonator using a cavity detector
- Quantum Optomechanics - throwing a glance
- Minimization of phonon-tunneling dissipation in mechanical resonators
- Beating quantum limits in optomechanical sensor by cavity detuning
- Monocrystalline AlGaAs heterostructures for high-reflectivity high-Q micromechanical resonators in the MHz regime
- A theoretical approach to thermal noise caused by an inhomogeneously distributed loss -- Physical insight by the advanced modal expansion