Metrological characterization of the pulsed Rb clock with optical detection

Abstract

We report on the implementation and the metrological characterization of a vapor-cell Rb frequency standard working in pulsed regime. The three main parts that compose the clock, physics package, optics and electronics, are described in detail in the paper. The prototype is designed and optimized to detect the clock transition in the optical domain. Specifically, the reference atomic transition, excited with a Ramsey scheme, is detected by observing the interference pattern on a laser absorption signal. \ The metrological analysis includes the observation and characterization of the clock signal and the measurement of frequency stability and drift. In terms of Allan deviation, the measured frequency stability results as low as $1.7\times 10^{-13}{\tau }^{-1/2}$, $\tau$ being the averaging time, and reaches the value of few units of $10^{-15}$ for $\tau =10^4$ s, an unprecedent achievement for a vapor cell clock. We discuss in the paper the physical effects leading to this result with particular care to laser and microwave noises transferred to the clock signal. The frequency drift, probably related to the temperature, stays below $10^{-14}$ per day, and no evidence of flicker floor is observed. \ We also mention some possible improvements that in principle would lead to a clock stability below the $10^{-13}$ level at 1 s and to a drift of few units of $10^{-15}$ per day.

References in corpus (1)

• Simple method of light-shift suppression in optical pumping systems

Cited by in corpus (25)

• Compact Optical Atomic Clock Based on a Two-Photon Transition in Rubidium
• High-performance coherent population trapping clock with polarization modulation
• A high-performance Raman-Ramsey Cs vapor cell atomic clock
• Coherent Population Trapping Resonances in Buffer Gas-filled Cs Vapor Cells with Push-Pull Optical Pumping
• Imaging of Relaxation Times and Microwave Field Strength in a Microfabricated Vapor Cell
• Dick effect in a pulsed atomic clock using Coherent Population Trapping
• Generalized auto-balanced Ramsey spectroscopy of clock transitions
• Stability of a trapped atom clock on a chip
• Progress and perspectives on composite laser-pulses spectroscopy for high-accuracy optical clocks
• Limitations of long term stability in a coherent population trapping Cs clock
• Ramsey spectroscopy of high-contrast CPT resonances with push-pull optical pumping in Cs vapor
• Imaging Microwave and DC Magnetic Fields in a Vapor-Cell Rb Atomic Clock
• A new scheme of compact cold atom clock based on diffuse laser cooling in a cylindrical cavity
• Frequency Shifts due to Stark Effects on a Rb two-photon transition
• Detection of ultra-high resonance contrast in vapor cell atomic clocks
• Combined error signal in Ramsey spectroscopy of clock transitions
• Synthetic Frequency Protocol in the Ramsey Spectroscopy of Clock Transitions
• A pulsed optically pumped Rb clock with a frequency stability below 10-15
• Measuring the polarization of electromagnetic fields using Rabi-rate measurements with spatial resolution: experiment and theory
• A simple scheme of low phase noise microwave synthesizers based on the sub-sampling phase lock loop
• Reduction of helium permeation in microfabricated cells using aluminosilicate glass substrates and Al${}_2$O${}_3$ coatings
• Reducing cavity-pulling shift in Ramsey-operated compact clocks
• Light Shift Suppression in Coherent-Population-Trapping Atomic Clocks in the Field of Two Circularly Polarized Light Beams
• Analytically exploiting noise correlations inside the feedback loop to improve locked-oscillator performance
• A low phase noise microwave source for high performance CPT Rb atomic clock