Scintillator detectors with long WLS fibers and multi-pixel photodiodes
arXiv:1110.2651 · doi:10.1088/1748-0221/6/12/P12004
Abstract
We have studied the possibility of using Geiger mode multi-pixel photodiodes to read out long scintillator bars with a single wavelength-shifting fiber embedded along the bar. This detector configuration can be used in large volume detectors in future long baseline neutrino oscillation experiments. Prototype bars of 0.7 cm thickness and different widths have been produced and tested using two types of multi-pixel photodiodes: MRS APD (CPTA, Moscow) and MPPC (Hamamatsu). A minimum light yield of 7.2 p.e./MeV was obtained for a 4 cm wide bar.
References in corpus (9)
- The T2K Experiment
- The magnetized steel and scintillator calorimeters of the MINOS experiment
- Characterization and Simulation of the Response of Multi Pixel Photon Counters to Low Light Levels
- The near neutrino detector for the T2K experiment
- The K2K SciBar Detector
- Application of Hamamatsu MPPC to T2K Neutrino Detectors
- Detectors and flux instrumentation for future neutrino facilities
- Scintillator counters with multi-pixel avalanche photodiode readout for the ND280 detector of the T2K experiment
- MINERvA: a dedicated neutrino scattering experiment at NuMI
Cited by in corpus (5)
- The SuperFGD Prototype Charged Particle Beam Tests
- Measurement of parameters of scintillating bars with wavelength-shifting fibres and silicon photomultiplier readout for the SHiP Muon Detector
- Light yield and radiation hardness studies of scintillator strips with a filler
- Time and Position Resolution of the Scintillator Strips for a Muon System at Future Colliders
- Performance of a SiPM-based, plastic scintillator muon veto prototype for CUPID