Waveguide grating mirror in a fully suspended 10 meter Fabry-Perot cavity
arXiv:1104.2780 · doi:10.1364/OE.19.014955
Abstract
We report on the first demonstration of a fully suspended 10m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall method and employing feedback to the laser frequency. From the achieved finesse of 790 the grating reflectivity was determined to exceed 99.2% at the laser wavelength of 1064\,nm, which is in good agreement with rigorous simulations. Our waveguide grating design was based on tantala and fused silica and included a ~20nm thin etch stop layer made of Al2O3 that allowed us to define the grating depth accurately during the fabrication process. Demonstrating stable operation of a waveguide grating featuring high reflectivity in a suspended low-noise cavity, our work paves the way for the potential application of waveguide gratings as mirrors in high-precision interferometry, for instance in future gravitational wave observatories.
References in corpus (5)
- Internal thermal noise in the LIGO test masses : a direct approach
- Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings
- A Xylophone Configuration for a third Generation Gravitational Wave Detector
- Realization of a monolithic high-reflectivity cavity mirror from a single silicon crystal
- High reflectivity grating waveguide coatings for 1064nm
Cited by in corpus (9)
- Gravitational Radiation Detection with Laser Interferometry
- High-finesse Fabry-Perot cavities with bidimensional SiN photonic-crystal slabs
- Technology for the next gravitational wave detectors
- Highly reflective low-noise etalon-based meta-mirror
- Squeezed-light interferometry on a cryogenically-cooled micro-mechanical membrane
- Tenfold reduction of Brownian noise in optical interferometry
- Invariance of waveguide grating mirrors to lateral displacement phase shifts
- Upper Limit to the Transverse to Longitudinal Motion Coupling of a Waveguide Mirror
- Thermal noise in complex systems