Simple and accurate analytical model of planar grids and high-impedance surfaces comprising metal strips or patches
arXiv:0705.3548 · doi:10.1109/TAP.2008.923327
Abstract
This paper introduces simple analytical formulas for the grid impedance of electrically dense arrays of square patches and for the surface impedance of high-impedance surfaces based on the dense arrays of metal strips or square patches over ground planes. Emphasis is on the oblique-incidence excitation. The approach is based on the known analytical models for strip grids combined with the approximate Babinet principle for planar grids located at a dielectric interface. Analytical expressions for the surface impedance and reflection coefficient resulting from our analysis are thoroughly verified by full-wave simulations and compared with available data in open literature for particular cases. The results can be used in the design of various antennas and microwave or millimeter wave devices which use artificial impedance surfaces and artificial magnetic conductors (reflect-array antennas, tunable phase shifters, etc.), as well as for the derivation of accurate higher-order impedance boundary conditions for artificial (high-) impedance surfaces. As an example, the propagation properties of surface waves along the high-impedance surfaces are studied.
12 pages, 10 figures, submitted to IEEE Transactions on Antennas and Propagation
Cited by in corpus (36)
- Analysis and Design of Ultra Thin Electromagnetic Absorbers Comprising Resistively Loaded High Impedance Surfaces
- A Circuit-based Model for the Interpretation of Perfect Metamaterial Absorbers
- A Thin Electromagnetic Absorber for Wide Incidence Angles and Both Polarizations
- Intelligent Metasurfaces with Continuously Tunable Local Surface Impedance for Multiple Reconfigurable Functions
- Ultra-wideband Reflection-type Metasurface for Generating Integer and Fractional Orbital Angular Momentum
- A multi-functional reconfigurable metasurface: Electromagnetic design accounting for fabrication aspects
- Theory and Design of Multifunctional Space-Time Metasurfaces
- Waveform-Selective Mantle Cloaks for Intelligent Antennas
- Effects of Spatial Dispersion on Reflection from Mushroom-type Artificial Impedance Surfaces
- Hyperbolic hybrid waves and optical topological transitions in few-layer anisotropic metasurfaces
- Constructing the Near field and Far field with Reactive Metagratings: Study on the Degrees of Freedom
- A Simple Equivalent Circuit Approach for Anisotropic Frequency Selective Surfaces and Metasurfaces
- Designing Metagratings Via Local Periodic Approximation: From Microwaves to Infrared
- Beamforming with metagratings at microwave frequencies: design procedure and experimental demonstration
- Enhanced optical activity in hyperbolic metasurfaces
- Electromagnetic Boundary Conditions Defined in Terms of Normal Field Components
- Non-Reciprocal and Collimated Surface Plasmons in Drift-biased Graphene Metasurfaces
- Radio-Transparent Dipole Antenna Based on a Metasurface Cloak
- An Efficient and Simple Analytical Model for Analysis of Propagation Properties in Impedance Waveguides
- Tunable and Broadband Coherent Perfect Absorption by Ultrathin Black Phosphorus Metasurfaces
- High-Q Dual-Band Graphene Absorbers by Selective Excitation of Graphene Plasmon Polaritons: Circuit Model Analysis
- Tamm Cavity in the Terahertz Spectral Range
- Exceptional Points in the Flatland: A Non-Hermitian Line-Wave Scenario
- Cross-polarization Control in FSSs by means of an Equivalent Circuit Approach
- Bimode Fosters Equivalent Circuit of Arbitrary Planar Periodic Structures and Its Application to Design Polarization Controller Devices
- Parallel-Plate Waveguides Formed by Penetrable Metasurfaces
- Design of reconfigurable Huygens metasurfaces based on Drude-like scatterers operating in the epsilon-negative regime
- Enhancement of Dual-Band Reflection-Mode Circular Polarizers Using Dual-Layer Rectangular Frequency Selective Surfaces
- Fundamentals of Horn Antennas with Low Cross-polarization Levels for Radioastronomy and Satellite Communications
- Semianalytically Designed Dual Polarized Printed-Circuit-Board (PCB) Metagratings
- Electromagnetic Model of Reflective Intelligent Surfaces
- Low-loss forward and backward surface plasmons in a semiconductor nanowire coated by helical graphene strips
- On the surface plasmonic waves excited by a dipole above anisotropic and spatially dispersive two-dimensional surfaces of infinite extent in planarly layered media
- Effective Local Permittivity Model for Non-Local Wire Media
- An Equivalent ABCD-Matrix Formalism for Non-Local Wire Media with Arbitrary Terminations
- Analysis and Design of a Reconfigurable Metasurface based on Chalcogenide Phase-Change Material for Operation in the Near and Mid Infrared