output
19912026
Showing 2022 · physics.ins-detShow all

18 papers · 2 filters

physics.ins-det2022★ 7 cited

Eco-friendly Resistive Plate Chambers for detectors in future HEP applications

Luca Quaglia

Resistive Plate Chamber detectors are largely used in current High Energy Physics experiments, typically operated in avalanche mode with large fractions of Tetrafluoroethane (C2H2F…

physics.ins-det2022★ 47 cited

Digital Pixel Test Structures implemented in a 65 nm CMOS process

Gianluca Aglieri Rinella, Anton Andronic, Matias Antonelli +49

The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 6…

physics.ins-det2022

High-Precision 4D Tracking with Large Pixels using Thin Resistive Silicon Detectors

R. Arcidiacono, G. Borghi, M. Boscardin +19

The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the sig…

physics.ins-det2022★ 1 cited

Commissioning and first performances of the ALICE MID RPCs

Livia Terlizzi

ALICE (A Large Ion Collider Experiment) at the CERN Large Hadron Collider (LHC) is designed to study p-p and Pb-Pb collisions at ultra-relativistic energies. ALICE is equipped with…

physics.ins-det2022★ 15 cited

10 ps timing with highly irradiated 3D trench silicon pixel sensors

A. Lampis, F. Borgato, D. Brundu +10

In this paper the results of a beam test characterization campaign of 3D trench silicon pixel sensors are presented. A time resolution in the order of 10 ps was measured both for n…

physics.ins-det2022★ 17 cited

Timespot1: A 28nm CMOS Pixel Read-Out ASIC for 4D Tracking at High Rates

Sandro Cadeddu, Luca Frontini, Adriano Lai +5

We present the first characterization results of Timespot1, an ASIC designed in CMOS 28 nm technology, featuring a pixel matrix with a pitch of . Timespot1…

physics.ins-det2022★ 31 cited

Sensitivity projections for a dual-phase argon TPC optimized for light dark matter searches through the ionization channel

P. Agnes, I. Ahmad, S. Albergo +296

Dark matter lighter than 10 GeV/c encompasses a promising range of candidates. A conceptual design for a new detector, DarkSide-LowMass, is presented, based on the DarkSide-50…

physics.ins-det2022★ 13 cited

A Compensated Design of the LGAD Gain Layer

Valentina Sola, Roberta Arcidiacono, Patrick Asenov +21

In this contribution, we present an innovative design of the Low-Gain Avalanche Diode (LGAD) gain layer, the p implant responsible for the local and controlled signal multiplic…

physics.ins-det2022★ 1 cited

Alignment of the CLAS12 central hybrid tracker with a Kalman Filter

S. J. Paul, A. Peck, M. Arratia +131

Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and no…

physics.ins-det2022★ 2 cited

Silicon sensors with resistive read-out: Machine Learning techniques for ultimate spatial resolution

Marta Tornago, Flavio Giobergia, Luca Menzio +8

Resistive AC-coupled Silicon Detectors (RSDs) are based on the Low Gain Avalanche Diode (LGAD) technology, characterized by a continuous gain layer, and by the innovative introduct…

physics.ins-det2022★ 6 cited

The Pixel Luminosity Telescope: A detector for luminosity measurement at CMS using silicon pixel sensors

Paul Lujan

The Pixel Luminosity Telescope is a silicon pixel detector dedicated to luminosity measurement at the CMS experiment at the LHC. It is located approximately 1.75 m from the interac…

physics.ins-det2022★ 27 cited

Crilin: A CRystal calorImeter with Longitudinal InformatioN for a future Muon Collider

S. Ceravolo, F. Colao, C. Curatolo +9

The measurement of physics processes at new energy frontier experiments requires excellent spatial, time, and energy resolutions to resolve the structure of collimated high-energy…

physics.ins-det2022★ 4 cited

Validation of high voltage power supplies for the 1-inch photomultipliers of AugerPrime, the Pierre Auger Observatory upgrade

Gioacchino Alex Anastasi, Mario Buscemi, Marco Aglietta +9

In the framework of the upgrade of the Pierre Auger Observatory, a new high voltage module is being employed for the power supply of the 1-inch photomultiplier added to each water-…

physics.ins-det2022★ 5 cited

The MAPS foil

S. Beolé, F. Carnesecchi, G. Contin +14

We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating…

physics.ins-det2022★ 7 cited

Commissioning of the PADME experiment with a positron beam

P. Albicocco, R. Assiro, F. Bossi +53

The PADME experiment is designed to search for a hypothetical dark photon produced in positron-electron annihilation using a bunched positron beam at the Beam Test Fac…

physics.ins-det2022★ 20 cited

DC-coupled resistive silicon detectors for 4-D tracking

L. Menzio, R. Arcidiacono, G. Borghi +14

In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features…

physics.ins-det2022★ 4 cited

First experimental results of the spatial resolution of RSD pad arrays read out with a 16-ch board

F. Siviero, F. Giobergia, L. Menzio +9

Resistive Silicon Detectors (RSD, also known as AC-LGAD) are innovative silicon sensors, based on the LGAD technology, characterized by a continuous gain layer that spreads across…

physics.ins-det2022★ 11 cited

First Measurements on the Timespot1 ASIC: a Fast-Timing, High-Rate Pixel-Matrix Front-End

Lorenzo Piccolo, Sandro Cadeddu, Luca Frontini +4

This work presents the first measurements performed on the Timespot1 ASIC. As the second prototype developed for the TimeSPOT project, the ASIC features a 32x32 channels hybrid-pix…