output
19922026
most citedObservation of an anomalous positron abundance in the cosmic radiation

2.2k citations

Showing 2021 · physics.ins-detShow all

25 papers · 2 filters

physics.ins-det2021★ 8 cited

Impact of the superconductors properties on the measurement sensitivity of resonant-based axion detectors

Andrea Alimenti, Kostiantyn Torokhtii, Daniele Di Gioacchino +3

Axions, hypothetical particles theorized to solve the strong CP-problem, are presently being considered as strong candidates as cold dark matter constituents. The signal power of r…

physics.ins-det2021

Studies on tetrafluoropropene-CO2 based gas mixtures for the Resistive Plate Chambers of the ALICE Muon IDentifier

Alessandro Ferretti

Due to their simplicity and comparatively low cost Resistive Plate Chambers are gaseous detectors widely used in high-energy and cosmic rays physics when large detection areas are…

physics.ins-det2021★ 13 cited

On a new environment-friendly gas mixture for Resistive Plate Chambers

G. Proto, B. Liberti, R. Santonico +9

This paper studies the performance of RPCs working with a new family of environment-friendly operating gases, mainly based on Carbon Dioxide and Hydro-Fluoro-Olefins. The tests are…

physics.ins-det2021★ 2 cited

Track reconstruction and matching between emulsion and silicon pixel detectors for the SHiP-charm experiment

SHiP Collaboration

In July 2018 an optimization run for the proposed charm cross section measurement for SHiP was performed at the CERN SPS. A heavy, moving target instrumented with nuclear emulsion…

physics.ins-det2021★ 9 cited

Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC

A. Samalan, M. Tytgat, G. A. Alves +108

During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb. The expected experime…

physics.ins-det2021★ 4 cited

First Results with the ANET Compact Thermal Neutron Collimator

Oriol Sans-Planell, Marco Costa, Elisabetta Durisi +7

This paper presents the first determination of the spatial resolution of the ANET Compact Neutron Collimator, obtained with a measuring campaign at the LENA Mark-II TRIGA reactor i…

physics.ins-det2021★ 4 cited

Performance of scintillating tiles with direct silicon-photomultiplier (SiPM) readout for application to large area detectors

A. Balla, B. Buonomo, V. Cafaro +18

The light yield, the time resolution and the efficiency of different types of scintillating tiles with direct Silicon Photomultiplier readout and instrumented with a customised fro…

physics.ins-det2021★ 1 cited

uRANIA-V: an innovative solution for neutron detection in homeland security

R. Farinelli, I. Balossino, G. Bencivenni +19

Detection of neutrons is becoming of the utmost importance, especially in the studies of radioactive waste and in homeland security applications. The crisis of 3He availability has…

physics.ins-det2021★ 9 cited

Operation and performance of the ATLAS semiconductor tracker in LHC Run 2

ATLAS Collaboration

The semiconductor tracker (SCT) is one of the tracking systems for charged particles in the ATLAS detector. It consists of 4088 silicon strip sensor modules. During Run 2 (20152…

physics.ins-det2021★ 7 cited

Design of a novel compact neutron collimator

Roberto Bedogni, Marco Costa, Elisabetta Durisi +7

In this work the concept of a novel slow neutron collimator and the way to operate it are presented. The idea is based on the possibility to decouple the device field-of-view from…

physics.ins-det2021★ 1 cited

Modeling the triple-GEM detector response to background particles for the CMS Experiment

M. Abbas, M. Abbrescia, H. Abdalla +186

An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the…

physics.ins-det2021★ 105 cited

Simulating NEMA characteristics of the modular total-body J-PET scanner -- an economic total-body PET from plastic scintillators

Paweł Moskal, Paweł Kowalski, Roman Shopa +26

The purpose of the presented research is estimation of the performance characteristics of the economic Total-Body Jagiellonian-PET system (TB-J-PET) constructed from plastic scinti…

physics.ins-det2021★ 13 cited

Development of a Josephson junction based single photon microwave detector for axion detection experiments

D Alesini, D Babusci, C Barone +30

Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently…

physics.ins-det2021★ 19 cited

Radiation study of Lead Fluoride crystals

A. Cemmi, A. Colangeli, B. D'orsi +8

Lead fluoride (PbF) crystals represent an excellent and relatively innovative choice for high resolution electromagnetic calorimeters with high granularity and fast timing for…

physics.ins-det2021

Performance of a Triple-GEM Demonstrator in Collisions at the CMS Detector

M. Abbas, M. Abbrescia, H. Abdalla +178

After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the…

physics.ins-det2021★ 1 cited

Results of the 2021 ECFA Early-Career Researcher Survey on Training in Instrumentation

ECFA Early-Career Researcher Panel, :, Anamika Aggarwal +74

The European Committee for Future Accelerators (ECFA) Early-Career Researchers (ECR) Panel was invited by the ECFA Detector R&D Roadmap conveners to collect feedback from the Europ…

physics.ins-det2021★ 35 cited

Radioactivity control strategy for the JUNO detector

JUNO collaboration, Angel Abusleme, Thomas Adam +594

JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from tw…

physics.ins-det2021★ 27 cited

Status of the SIMP Project: Toward the Single Microwave Photon Detection

David Alesini, Danilo Babusci, Carlo Barone +30

The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the…

physics.ins-det2021★ 9 cited

First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors

ALICE ITS project, :, G. Aglieri Rinella +250

A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them t…

physics.ins-det2021★ 2 cited

Muon detection in electron-positron annihilation for muon collider studies

N. Amapane, M. Antonelli, F. Anulli +43

The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study partic…

physics.ins-det2021★ 9 cited

Coded masks for imaging of neutrino events

M. Andreotti, P. Bernardini, A. Bersani +76

The capture of scintillation light emitted by liquid Argon and Xenon under molecular excitations by charged particles is still a challenging task. Here we present a first attempt t…

physics.ins-det2021★ 19 cited

The CGEM-IT readout chain

A. Amoroso, R. Baldini Ferroli, I. Balossino +44

An innovative Cylindrical Gas Electron Multiplier (CGEM) detector is under construction for the upgrade of the inner tracker of the BESIII experiment. A novel system has been worke…

physics.ins-det2021★ 20 cited

A Comparison of CPU and GPU implementations for the LHCb Experiment Run 3 Trigger

R. Aaij, M. Adinolfi, S. Aiola +157

The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software i…

physics.ins-det2021★ 5 cited

The cosmic muon and detector simulation framework of the Extreme Energy Events (EEE) experiment

M. Abbrescia, C. Avanzini, L. Baldini +60

This paper describes the simulation framework of the Extreme Energy Events (EEE) experiment. EEE is a network of cosmic muon trackers, each made of three Multi-gap Resistive Plate…