699 citations · 8.7k across the 215 of their papers we have counts for
12 papers · 1 filter
Test results of the LQXFA/B02 and LQXFA/B03 cryo-assemblies for the High Luminosity LHC upgrade
G. Chlachidze, G. Ambrosio, M. Anerella +13
The US High-Luminosity LHC Accelerator Upgrade Project (AUP) is responsible for delivering cryo-assemblies for the Q1/Q3 quadrupole optical components of the High Luminosity LHC up…
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
M. Benedikt, F. Zimmermann, B. Auchmann +1461
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration ho…
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
M. Benedikt, F. Zimmermann, B. Auchmann +1461
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability asp…
First results of AUP Nb3Sn quadrupole horizontal tests
M. Baldini, G. Ambrosio, G. Apollinari +48
The Large Hadron Collider will soon undergo an upgrade to increase its luminosity by a factor of ~10 [1]. A crucial part of this upgrade will be replacement of the NbTi focusing ma…
Quench Performance of the First Pre-series AUP Cryo-assembly
M. Baldini, G. Chlachidze, G. Apollinari +9
The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN will include eight cryo-assemblies that are expected to be fabricated and delivered to CERN by the US HL-L…
MQXFA Series Magnet Production Specification
Paolo Ferracin, Giorgio Ambrosio, Giorgio Apollinari +7
The purpose of this document is to define the specifications for the structure fabrication and assembly of MQXFA series magnets to be used by the US High-Luminosity LHC Accelerator…
Challenges and Lessons Learned from fabrication, testing and analysis of eight MQXFA Low Beta Quadrupole magnets for HL-LHC
G. Ambrosio, K. Amm, M. Anerella +55
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low b…
A Strategic Approach to Advance Magnet Technology for Next Generation Colliders
G. Ambrosio, K. Amm, M. Anerella +74
Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the ex…
White Paper on Leading-Edge technology And Feasibility-directed (LEAF) Program aimed at readiness demonstration for Energy Frontier Circular Colliders by the next decade
G. Ambrosio, G. Apollinari, M. Baldini +39
In this White Paper for the Snowmass 2021 Process, we propose the establishment of a magnet Leading-Edge technology And Feasibility-directed Program (LEAF Program) to achieve readi…
MQXFA Final Design Report
Giorgio Ambrosio, Kathleen Amm, Mike Anerella +29
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS).…
Development and demonstration of next generation technology for Nb_3Sn accelerator magnets with lower cost, improved performance uniformity, and higher operating point in the 12-14 T range
Giorgio Ambrosio, Giorgio Apollinari, Vito Lombardo +7
The scope of the proposal outlined in this white paper is the development and demonstration of the technology needed for next generation of Nb_3Sn accelerator magnets in the 12-14…
High Luminosity Large Hadron Collider HL-LHC
G. Apollinari, O. Bruening, T. Nakamoto +1
HL-LHC federates the efforts and R&D of a large international community towards the ambitious HL- LHC objectives and contributes to establishing the European Research Area (ERA) as…