42 citations · 42 across the 2 of their papers we have counts for
5 papers
3D characterization of the primary Al3Sc phases in an Al-Sc alloy using Synchrotron X-ray tomography and electron microscopy
Yuliang Zhao, Weiwen Zhang, Billy Koe +7
The three-dimensional structures of the primary Al3Sc particles in an Al-2Sc master alloy were studied by synchrotron X-ray microtomography, scanning and transmission electron micr…
3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys by synchrotron X-ray tomography
Yuliang Zhao, Dongfu Song, Bo Lin +4
The effect of ultrasonic melting processing on three-dimensional architecture of intermetallic phases and pores in two multicomponent cast Al-5.0Cu-0.6Mn-0.5 Fe alloys is character…
Synchrotron X-ray tomography investigation of 3D morphology of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys
Yuliang Zhao, Zhi Wang, Chun Zhang +1
The influence of Fe content on the three-dimensional (3D) morphology of Fe-rich intermetallic phases (Fe phases), Al2Cu, and pores and mechanical properties of cast Al-5.0Cu-0.6Mn…
Microstructure and mechanical properties of Al-Cu alloy with 0.6%Fe produced with ultrasonic vibration and applied pressure
Yuliang Zhao, Weiwen Zhang, Fansheng Meng +3
The combined effect of ultrasonic vibration (UT) and applied pressure (P) on microstructure and mechanical properties of Al-5.0Cu-0.6Mn-0.6Fe alloy were investigated. The best tens…
Effect of Si on Fe-rich intermetallic formation and mechanical properties of heattreated Al-Cu-Mn-Fe alloys
Yuliang Zhao, Weiwen Zhang, Chao Yang +2
The effect of Si on Fe-rich intermetallics formation and mechanical properties of heat-treated squeeze cast Al-5.0Cu-0.6Mn-0.7Fe alloy was investigated. Our results show that incre…