611 citations · 9.1k across the 207 of their papers we have counts for
13 papers · 1 filter
Production and validation of industrially produced large-sized GEM foils for the Phase-2 upgrade of the CMS muon spectrometer
Inseok Yoon
The upgrade of the CMS detector for the high luminosity LHC (HL-LHC) will include gas electron multiplier (GEM) detectors in the end-cap muon spectrometer. Due to the limited suppl…
Machine Learning based tool for CMS RPC currents quality monitoring
E. Shumka, A. Samalan, M. Tytgat +105
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile…
RPC based tracking system at CERN GIF++ facility
K. Mota Amarilo, A. Samalan, M. Tytgat +105
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for s…
Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade
M. Abbas, M. Abbrescia, H. Abdalla +179
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS…
Modeling the triple-GEM detector response to background particles for the CMS Experiment
M. Abbas, M. Abbrescia, H. Abdalla +186
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the…
Performance of a Triple-GEM Demonstrator in Collisions at the CMS Detector
M. Abbas, M. Abbrescia, H. Abdalla +178
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the…
Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade
M. Abbas, M. Abbrescia, H. Abdalla +178
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensio…
Precision measurement of the structure of the CMS inner tracking system using nuclear interactions
CMS Collaboration
The structure of the CMS inner tracking system has been studied using nuclear interactions of hadrons striking its material. Data from proton-proton collisions at a center-of-mass…
High rate, fast timing Glass RPC for the high η CMS muon detectors
F. Lagarde, M. Gouzevitch, I. Laktineh +108
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the ins…
CMS RPC muon detector performance with 2010-2012 LHC data
G. Pugliese
The muon spectrometer of the CMS (Compact Muon Solenoid) experiment at the Large Hadron Collider (LHC) is equipped with a redundant system made of Resistive Plate Chambers and Drif…
Radiation background with the CMS RPCs at the LHC
Silvia Costantini
The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This note presents results of th…
CMS Resistive Plate Chamber overview, from the present system to the upgrade phase I
P. Paolucci, R. Hadjiiska, L. Litov +60
University of Sofia, Faculty of Physics, Atomic Physics Department, 5, James Bourchier Boulevard, BG-1164 Sofia, Bulgaria Ghent University, Department of Physics and Astronomy, Pro…
The Upgraded D0 Detector
D0 Collaboration
The D0 experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider between 1992 and 1996. Since then, the detector has been upgraded to take advantag…