72 citations · 149 across the 8 of their papers we have counts for
8 papers
Effect of CLIQ on training of HL-LHC quadrupole magnets
S. Stoynev, G. Ambrosio, K. Amm +6
The high-luminosity LHC upgrade requires stronger than LHC low-beta quadrupole magnets to reach the luminosity goals of the project. The project is well advanced and HL-LHC quadrup…
20 T Dipole Magnet Based on Hybrid HTS/LTS Cos-Theta Coils with Stress Management
A. V. Zlobin, I. Noviski, E. Barzi +1
This paper presents the design concept of the dipole magnet with 50 mm aperture, 20 T nominal field and 13% margin based on a six-layer cos-theta (CT) hybrid coil design. Due to th…
Conceptual design of 20 T hybrid accelerator dipole magnets
P. Ferracin, G. Ambrosio, M. Anerella +17
Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High T…
MQXFA Series Magnet Production Specification
Paolo Ferracin, Giorgio Ambrosio, Giorgio Apollinari +7
The purpose of this document is to define the specifications for the structure fabrication and assembly of MQXFA series magnets to be used by the US High-Luminosity LHC Accelerator…
Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets
J. Ferradas Troitino, G. Ambrosio, N. Bourcey +14
The use of pressurized bladders for stress control of superconducting magnets was firstly proposed at Lawrence Berkeley National Laboratory (LBNL) in the early 2000s. Since then, t…
Challenges and Lessons Learned from fabrication, testing and analysis of eight MQXFA Low Beta Quadrupole magnets for HL-LHC
G. Ambrosio, K. Amm, M. Anerella +55
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low b…