202 citations · 709 across the 23 of their papers we have counts for
13 papers · 1 filter
Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC
A. Samalan, M. Tytgat, G. A. Alves +108
During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb. The expected experime…
Modeling the triple-GEM detector response to background particles for the CMS Experiment
M. Abbas, M. Abbrescia, H. Abdalla +186
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the…
Towards a two-dimensional readout of the improved CMS Resistive Plate Chamber with a new front-end electronics
Sabino Meola
As part of the Compact Muon Solenoid experiment Phase-II upgrade program, new Resistive Plate Chambers will be installed in the forward region. High background conditions are expec…
CMS RPC Background -- Studies and Measurements
R. Hadjiiska, A. Samalan, M. Tytgat +106
The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used…
Improved-RPC for the CMS muon system upgrade for the HL-LHC
Priyanka Kumari
During Phase-2 of the LHC, known as the High Luminosity LHC (HL-LHC), the accelerator will increase its instantaneous luminosity to 5 10 cm s, deliver…
High rate, fast timing Glass RPC for the high η CMS muon detectors
F. Lagarde, M. Gouzevitch, I. Laktineh +108
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the ins…
High rate, fast timing Glass RPC for the high CMS muon detectors
Maxime Gouzevitch, François Lagarde, Imad Laktineh +16
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the ins…
Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment
M. Shopova, A. Aleksandrov, R. Hadjiiska +93
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward…
Radiation Tests of Real-Sized Prototype RPCs for the Future CMS RPC Upscope
K. S. Lee, S. Choi, B. S. Hong +93
We report on a systematic study of double-gap and four-gap phenolic resistive plate chambers (RPCs) for future high-η RPC triggers in the CMS. In the present study, we constructed…
A novel application of Fiber Bragg Grating (FBG) sensors in MPGD
D. Abbaneo, M. Abbas, M. Abbrescia +153
We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to…
Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors
D. Abbaneo, M. Abbas, M. Abbrescia +153
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and…
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
E. Abat, J. M. Abdallah, T. N. Addy +482
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis o…
A Layer Correlation Technique for Pion Energy Calibration at the 2004 ATLAS Combined Beam Test
Karl-Johan Grahn
A new method for calibrating the hadron response of a segmented calorimeter is developed. It is based on a principal component analysis of the calorimeter layer energy deposits, ex…