activity
20112026
most citedSynchrotron radiation based beam diagnostics at the Fermilab Tevatron

7 citations · 16 across the 7 of their papers we have counts for

collaborators

9 papers

physics.acc-ph2026

Ionization Profile Monitors for the IOTA Storage Ring at Fermilab

R. Thurman-Keup, N. Banerjee, M. Bressler +8

Ionization profile monitors (IPM) are used in many accelerator laboratories around the world for non-destructive profile measurements of high-energy particle beams. They have been…

physics.acc-ph2023

A Simulation of the Photoionization of H- Together with the Subsequent Tracking of the Liberated Electrons

R. Thurman-Keup, M. El Baz, V. Scarpine

The Proton Improvement Plan - II (PIP-II) is a new linear accelerator (LINAC) complex being built at Fermilab. It is based on superconducting radiofrequency cavities and will accel…

physics.acc-ph2023

A Study of the Gain of Microchannel Plates in the Ionization Profile Monitors at Fermilab

R. Thurman-Keup, D. Slimmer, C. Lundberg +1

One of the on-going issues with the use of microchannel plates (MCP) in the ionization profile monitors (IPM) at Fermilab is the significant decrease in gain over time. There are s…

physics.acc-ph2023

Progress on an Electron Beam Profile Monitor at the Fermilab Main Injector

R. Thurman-Keup, T. Folan, M. Mwaniki +1

The current program at Fermilab involves the construction of a new superconducting linear accelerator (LINAC) to replace the existing warm version. The new LINAC, together with oth…

physics.acc-ph2018★ 2 cited

Commissioning and first results of the Electron Beam Profiler in the Main Injector at Fermilab

R. Thurman-Keup, M. Alvarez, J. Fitzgerald +4

The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging an…

physics.acc-ph2015

Installation status of the electron beam profiler for the Fermilab Main Injector

R. Thurman-Keup, M. Alvarez, J. Fitzgerald +5

The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging an…

physics.acc-ph2015★ 3 cited

Third generation residual gas ionization profile monitors at Fermilab

J. R. Zagel, M. Alvarez, B. Fellenz +6

The latest generation of IPMs installed in the Fermilab Main Injector and Recycler incorporate a 1 kG permanent magnet, a newly designed high-gain, rad-tolerant preamp, and a contr…

physics.ins-det2011★ 4 cited

The upgraded data acquisition system for beam loss monitoring at the Fermilab Tevatron and Main Injector

A. Baumbaugh, C. Briegel, B. C. Brown +14

A VME-based data acquisition system for beam-loss monitors has been developed and is in use in the Tevatron and Main Injector accelerators at the Fermilab complex. The need for enh…

physics.ins-det2011★ 7 cited

Synchrotron radiation based beam diagnostics at the Fermilab Tevatron

R. Thurman-Keup, H. W. K. Cheung, A. Hahn +7

Synchrotron radiation has been used for many years as a beam diagnostic at electron accelerators. It is not normally associated with proton accelerators as the intensity of the rad…