568 citations · 768 across the 12 of their papers we have counts for
12 papers
Production and Integration of the ATLAS Insertable B-Layer
B. Abbott, J. Albert, F. Alberti +373
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, s…
Test in a beam of large-area Micromegas chambers for sampling calorimetry
C. Adloff, M. Chefdeville, A. Dalmaz +9
Application of Micromegas for sampling calorimetry puts specific constraints on the design and performance of this gaseous detector. In particular, uniform and linear response, low…
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
C. Adloff, J. -J. Blaising, M. Chefdeville +210
The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and de…
Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL
C. Adloff, J. -J. Blaising, M. Chefdeville +215
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an collide…
Validation of GEANT4 Monte Carlo Models with a Highly Granular Scintillator-Steel Hadron Calorimeter
C. Adloff, J. Blaha, J. -J. Blaising +169
Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, c…
Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter
CALICE Collaboration, C. Adloff, J. -J. Blaising +205
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find tr…
Hadronic energy resolution of a highly granular scintillator-steel hadron calorimeter using software compensation techniques
CALICE Collaboration, C. Adloff, J. Blaha +163
The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS.…
Recent results of Micromegas sDHCAL with a new readout chip
C. Adloff, J. Blaha, J. -J. Blaising +13
Calorimetry at future linear colliders could be based on a particle flow approach where granularity is the key to high jet energy resolution. Among different technologies, Micromeg…
Micromegas for imaging hadronic calorimetry
C. Adloff, J. Blaha, S. Cap +12
The recent progress in R&D of the Micromegas detectors for hadronic calorimetry including new engineering-technical solutions, electronics development, and accompanying simulation…
Electromagnetic response of a highly granular hadronic calorimeter
C. Adloff, J. Blaha, J. -J. Blaising +164
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic c…
Status of the Micromegas semi-DHCAL
C. Adloff, J. Blaha, J. -J. Blaising +8
The activities towards the fabrication and test of a 1 m3 semi-digital hadronic calorime- ter are reviewed. The prototype sampling planes would consist of 1 m2 Micromegas chambers…
MICROMEGAS chambers for hadronic calorimetry at a future linear collider
C. Adloff, D. Attie, J. Blaha +15
Prototypes of MICROMEGAS chambers, using bulk technology and analog readout, with 1x1cm2 readout segmentation have been built and tested. Measurements in Ar/iC4H10 (95/5) and Ar/CO…