activity
20112025
most citedHigh-density gas target at the LHCb experiment

16 citations · 26 across the 13 of their papers we have counts for

collaborators
Showing physics.acc-phShow all

11 papers · 1 filter

physics.acc-ph2025

Post Long Shutdown 2 CERN Proton Synchrotron Transverse Impedance Model: Description and Beam-Based Validation

Sébastien Joly, Mauro Migliorati, Nicolas Mounet +1

In the framework of the LHC Injectors Upgrade project, the CERN Proton Synchrotron underwent hardware changes during the Long Shutdown 2. These changes required an update of the CE…

physics.acc-ph2021★ 1 cited

High intensity proton beam impact at 440 GeV/c on Mo and Cu coated CfC/graphite and SiC/SiC absorbers for beam intercepting devices

Jorge Maestre, Cristina Bahamonde, Inigo Lamas Garcia +14

Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injecti…

physics.acc-ph2021

Beam Measurements and Machine Learning at the CERN Large Hadron Collider

P. Arpaia, G. Azzopardi, F. Blanc +16

This paper presents a review of the recent Machine Learning activities carried out on beam measurements performed at the CERN Large Hadron Collider. This paper has been accepted fo…

physics.acc-ph2019

A method for computing driving and detuning beam coupling impedances of an asymmetric cavity using eigenmode simulations

S. Arsenyev, B. Salvant

We propose a method for numerical calculation of driving and detuning transverse beam coupling impedances of an asymmetric cavity. The method relies on eigenmode simulations and ca…

physics.acc-ph2018★ 1 cited

Effect of Crab cavity HOMs on the coupled-bunch stability of HL-LHC

Sergey Antipov, Nicolo Biancacci, Jani Komppula +2

High frequency High Order Modes can significantly affect the coupled-bunch stability in a circular accelerator. With a large enough shunt impedance they may drive a coupled-bunch t…

physics.acc-ph2017★ 1 cited

Machine Layout and Performance

D. Angal-Kalinin, R. Appleby, G. Arduini +57

Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Si…

physics.acc-ph2014★ 5 cited

Progress with the Upgrade of the SPS for the HL-LHC Era

B. Goddard, T. Argyropoulos, H. Bartosik +28

The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this pa…

physics.acc-ph2012

Beam Coupling Impedance of the LHC TCTP Collimators

Hugo Day, Fritz Caspers, Alessandro Dallocchio +5

As part of an upgrade to the LHC collimation system, 8 TCTP and 1 TCSG collimators are proposed to replace existing collimators in the collimation system. In an effort to review al…

physics.acc-ph2012★ 1 cited

Evaluation of the Beam Coupling Impedance of New Beam Screen Designs for the LHC Injection Kicker Magnets

Hugo Day, Michael Barnes, Fritz Caspers +3

During the 2011 run of the LHC there was a significant measured temperature increase in the LHC Injection Kicker Magnets (MKI) during operation with 50ns bunch spacing. This was du…

physics.acc-ph2011

Comparison of the current LHC Collimators and the SLAC Phase 2 Collimator Impedances

Hugo Day, Fritz Caspers, Elias Metral +2

One of the key sources of transverse impedance in the LHC has been the secondary graphite collimators that sit close to the beam at all energies. This limits the stable bunch inten…

physics.acc-ph2011★ 1 cited

Coaxial Wire Measurements of Ferrite Kicker Magnets

Hugo Day, Michael Barnes, Fritz Caspers +4

Fast kicker magnets are used to inject beam into and eject beam out of the CERN accelerator rings. These kickers are generally transmission line type magnets with a rectangular sha…