7 citations · 12 across the 5 of their papers we have counts for
6 papers
A Study of the Gain of Microchannel Plates in the Ionization Profile Monitors at Fermilab
R. Thurman-Keup, D. Slimmer, C. Lundberg +1
One of the on-going issues with the use of microchannel plates (MCP) in the ionization profile monitors (IPM) at Fermilab is the significant decrease in gain over time. There are s…
Commissioning and first results of the Electron Beam Profiler in the Main Injector at Fermilab
R. Thurman-Keup, M. Alvarez, J. Fitzgerald +4
The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging an…
Installation status of the electron beam profiler for the Fermilab Main Injector
R. Thurman-Keup, M. Alvarez, J. Fitzgerald +5
The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging an…
Third generation residual gas ionization profile monitors at Fermilab
J. R. Zagel, M. Alvarez, B. Fellenz +6
The latest generation of IPMs installed in the Fermilab Main Injector and Recycler incorporate a 1 kG permanent magnet, a newly designed high-gain, rad-tolerant preamp, and a contr…
CMS Pixel Telescope Addition to T-980 Bent Crystal Collimation Experiment at the Tevatron
Ryan Rivera, Jerry Annala, Todd Johnson +7
An enhancement to the T-980 bent crystal collimation experiment at the Tevatron has been completed. The enhancement was the installation of a pixel telescope inside the vacuum-seal…
Synchrotron radiation based beam diagnostics at the Fermilab Tevatron
R. Thurman-Keup, H. W. K. Cheung, A. Hahn +7
Synchrotron radiation has been used for many years as a beam diagnostic at electron accelerators. It is not normally associated with proton accelerators as the intensity of the rad…