31 citations · 49 across the 12 of their papers we have counts for
14 papers
LCLS-II-HE verification cryomodule high gradient performance and quench behavior
S. Posen, A. Cravatta, M. Checchin +43
An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitr…
Commissioning And First Results From The Fermilab Cryomodule Test Stand
E. R. Harms, M. Awida, C. Baffes +34
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cool…
Commissioning and first results of the Electron Beam Profiler in the Main Injector at Fermilab
R. Thurman-Keup, M. Alvarez, J. Fitzgerald +4
The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging an…
Diagnostics upgrades for investigations of HOM effects in Tesla-type SCRF cavities
A. H. Lumpkin, D. Edstrom, J. Ruan +5
We describe the upgrades to diagnostic capabilities on the Fermilab Accelerator Science and Technology (FAST) electron linear accelerator that will allow investigations of the effe…
Fermilab Cryomodule Test Stand RF Interlock System
T. Petersen, J. S. Diamond, D. McDowell +3
An interlock system has been designed for the Fermilab Cryo-module Test Stand (CMTS), a test bed for the cryomodules to be used in the upcoming Linac Coherent Light Source 2 (LCLS-…
Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results
T. Petersen, J. Diamond, N. Liu +3
The readout electronics for the resonant beam position monitors (BPMs) in the Fermilab Switchyard (SY) have been upgraded, utilizing a low noise amplifier transition board and Ferm…