2 citations · 2 across the 5 of their papers we have counts for
8 papers
PIP-II SSR2 Cavities Fabrication and Processing Experience
M. Parise, D. Passarelli, P. Berrutti +2
The Proton Improvement Plan-II (PIP-II [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A preproduction SSR2 cryomodule will contain 5 jacketed cavities. Several u…
Design, Manufacturing, Assembly, and Lessons Learned of the Pre-production 325 MHz Couplers for the PIP-II Project at Fermilab
J. Helsper, S. Wallon, D. Passarelli +3
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were pro…
Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab
II Collaboration, M. Parise, D. Passarelli +1
The beam volume of the Pre-Production Single Spoke Resonator type 2 (ppSSR2) cryomodule [1] for the Proton Improvement Plan-II (PIP-II) [2] project will be protected against over-p…
Niobium to Titanium Electron Beam Welding for SRF Cavities
M. Parise, D. Passarelli, J. Bernardini
Titanium and niobium are the main materials used for the fabrication of Superconducting Radio Frequency (SRF) cavities. These two metals are usually joined , using various welding…
Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab
M. Parise, D. Passarelli, P. Berrutti +3
The Proton Improvement Plan-II (PIP-II, [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A total of eight pre-production SSR2 jacketed cavities will be procured an…
Final Design Of The Pre-production SSR2 Cryomodule For PIP-II Project At Fermilab
J. Bernardini, D. Passarelli, V. Roger +10
The present contribution reports the design of the pre-production Single Spoke Resonator Type 2 Cryomodule (ppSSR2 CM), developed in the framework of the PIP-II project at Fermilab…
Application Of The ASME Boiler And Pressure Vessel Code In The Design Of SSR Cryomodule Beamlines For PIP-II Project At Fermilab
J. Bernardini, M. Parise, M. Chen +1
This contribution reports the design of the main components used to interconnect SRF cavities and superconducting focusing lenses in the SSR Cryomodule beamlines, developed in the…
Tuning of Multicell Superconducting Accelerating Cavities using Pressurized Balloons
Mohamed H. Awida, Donato Passarelli, Marco Castellari +2
Plastic tuning of multicell superconducting accelerating cavities is crucial in the development cycle of cavities for particle accelerators. Cavities must meet stringent requiremen…