88 citations · 458 across the 23 of their papers we have counts for
23 papers
Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC
The CMS Electromagnetic Calorimeter Group
The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam te…
The CMS Barrel Timing Layer: test beam confirmation of module timing performance
F. Addesa, P. Akrap, A. Albert +127
First of its kind, the barrel section of the MIP Timing Detector is a large area timing detector based on LYSO:Ce crystals and SiPMs which are required to operate in an unprecedent…
Optimization of LYSO crystals and SiPM parameters for the CMS MIP timing detector
F. Addesa, T. Anderson, P. Barria +68
For the High-Luminosity (HL-LHC) phase, the upgrade of the Compact Muon Solenoid (CMS) experiment at CERN will include a novel MIP Timing Detector (MTD). The central part of MTD, t…
Autoencoder-based Anomaly Detection System for Online Data Quality Monitoring of the CMS Electromagnetic Calorimeter
The CMS ECAL Collaboration
The CMS detector is a general-purpose apparatus that detects high-energy collisions produced at the LHC. Online Data Quality Monitoring of the CMS electromagnetic calorimeter is a…
Integration of thermo-electric coolers into the CMS MTD SiPM arrays for operation under high neutron fluence
A. Bornheim, W. Lustermann, K. Stachon +27
The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in…
Comparative characterization study of LYSO:Ce crystals for timing applications
F. M. Addesa, P. Barria, R. Bianco +28
Cerium-doped Lutetium-Yttrium Oxyorthosilicate (LYSO:Ce)is one of the most widely used Cerium-doped Lutetium based scintillation crystals. Initially developed for medical detectors…
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
R. Abbott, A. Abreu, F. Addesa +196
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event re…
Response of microchannel plates in ionization mode to single particles and electromagnetic showers
A. Yu. Barnyakov, M. Yu. Barnyakov, L. Brianza +22
Hundreds of concurrent collisions per bunch crossing are expected at future hadron colliders. Precision timing calorimetry has been advocated as a way to mitigate the pileup effect…
Secondary radiation measurements for particle therapy applications: nuclear fragmentation produced by He ion beams in a PMMA target
M. Marafini, R. Paramatti, D. Pinci +19
Nowadays there is a growing interest in Particle Therapy treatments exploiting light ion beams against tumors due to their enhanced Relative Biological Effectiveness and high space…
Secondary radiation measurements for particle therapy applications: Charged secondaries produced by 4He and 12C ion beams in a PMMA target at large angle
A. Rucinski, E. De Lucia, G. Battistoni +18
Measurements performed with the purpose of characterizing the charged secondary radiation for dose release monitoring in particle therapy are reported. Charged secondary yields, en…
Design of a new tracking device for on-line dose monitor in ion therapy
Giacomo Traini, Giuseppe Battistoni, Angela Bollella +22
Charged Particle Therapy is a technique for cancer treatment that exploits hadron beams, mostly protons and carbons. A critical issue is the monitoring of the dose released by the…
Secondary radiation measurements for particle therapy applications: prompt photons produced by He, C and O ion beams in a PMMA target
Ilaria Mattei, Francesco Collamati, Erika De Lucia +18
Charged particle beams are used in Particle Therapy (PT) to treat oncological patients due to their selective dose deposition in tissues and to their high biological effect in kill…
Polycrystalline para-terphenyl scintillator adopted in a detecting probe for radio-guided surgery
Elena Solfaroli Camillocci, Fabio Bellini, Valerio Bocci +15
A radio-guided surgery technique exploiting emitters is under development. It aims at a higher target-to-background activity ratio implying both a smaller radiopharmaceutical…
An Intraoperative Detecting Probe For Radio-Guided Surgery in Tumour Resection
Andrea Russomando, Fabio Bellini, Valerio Bocci +16
The development of the based radio-guided surgery aims to extend the technique to those tumours where surgery is the only possible treatment and the assessment of the resecti…
Performance of a Tungsten-Cerium Fluoride Sampling Calorimeter in High-Energy Electron Beam Tests
R. Becker, L. Bianchini, G. Dissertori +29
A prototype for a sampling calorimeter made out of cerium fluoride crystals interleaved with tungsten plates, and read out by wavelength-shifting fibres, has been exposed to beams…
Response of microchannel plates to single particles and to electromagnetic showers
L. Brianza, F. Cavallari, D. Del Re +22
We report on the response of microchannel plates (MCPs) to single relativistic particles and to electromagnetic showers. Particle detection by means of secondary emission of electr…
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
The CMS Electromagnetic Calorimeter Group, P. Adzic, N. Almeida +267
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The produ…
Search for Colour Singlet and Colour Reconnection Effects in Hadronic Z Decays at LEP
L3 Collaboration
A search is performed in symmetric 3-jet hadronic Z decay events for evidence of colour singlet production or colour reconnection effects. Asymmetries in the angular separation of…
Search for Single Top Production at LEP
L3 Collaboration
Single top production in e+e- annihilations is searched for in data collected by the L3 detector at centre-of-mass energies from 189 to 209 GeV, corresponding to a total integrated…
Measurement of Genuine Three-Particle Bose-Einstein Correlations in Hadronic Z decay
L3 Collaboration
We measure three-particle Bose-Einstein correlations in hadronic Z decay with the L3 detector at LEP. Genuine three-particle Bose-Einstein correlations are observed. By comparing t…
f_1(1285) Formation in Two-Photon Collisions at LEP
L3 Collaboration
The eta pi^+ pi^- final state in two-photon collisions is studied with the L3 detector at LEP, at centre-of-mass energies from 183 to 209 GeV with an integrated luminosity of 664.6…
Production of Single W Bosons at \sqrt{s}=189 GeV and Measurement of WWgamma Gauge Couplings
L3 Collaboration
Single W boson production in electron-positron collisions is studied with the L3 detector at LEP. The data sample collected at a centre-of-mass energy of \sqrt{s} = 188.7GeV corres…
Measurement of the Spectroscopy of Orbitally Excited B Mesons at LEP
L3 Collaboration
We measure the masses, decay widths and relative production rate of orbitally excited B mesons using 1.25 million hadronic Z decays recorded by the L3 detector. B-meson candidates…